Repair attempt unsuccessful, no chance of repair.
Thanks for the help.
Sounds a lot like a damaged Ensonique Sound chip.
Seems somebody has been trying to attempt the chip by the portplug
and damaged the chip.
up to my knowledge the chip hasn´t changed between ROM 1 and ROM 3 - it´s the same...
but i´m sorry to disencourage you with a move of that chip....
such a task needs very very advanced technical experience and tools....
The Soundchip itself is still a rather simple DIP 40 Chip. But the Sound is not only dependent to that chip itself.
The Sound of the IIGS is a complex group of chips working colaborative together ( see sketch below ).
The Sound GLU ( GLU = General Logic Unit )is the chip that controls the communication between CPU and the Soundchip and it also controls partially the access between the Soundchip and the Sound RAM.
The Sound RAM is a very specific part of that process. It can be valued as a kind of temporary storage
that contains sound DATA ( digitalized sound strings ) and the Sound GLU also controls the communication
between the sound chip and it´s Sound RAM. It also can move contents from Sound RAM to regular workspace
The Sound GLU is not a normal chip... it´s one of those big UFO´s ....
the only way to remove this chip is with special reflow tools....
and fixing it at the other board also needs very special technical tools.....
and very much experience ! It´s unfortunatly a task that can´t be performed with a soldering iron.....
even an experienced technician would think twice or three times - if he would make an attempt to such a task
- even if he has the required tools ! That traces are too thin and too fragile and the danger to harm
the mainboard and after all hard work having a totally ruined mainboard is high !
The main problem is to locate the part that really has been damaged within
the entire group of chips related to the sound.
Some of the chips may be harmed by static discharge ( Sound RAM, Sound chip, or Sound GLU )and other parts might
get damaged by temporary shortcut Output Amps complex or soundchip ) or exceeding of chiplimits of permitted
voltage ( to high voltage at port ).
The safe way is not using that chip disconnecting the speaker and inserting a replacement like a mockingboard clone...
SpeedyG, I think you have mislabeled the sound chip.
The DIP40 next to the sound connector is the sound chip.
What you have labeled as the sound chip is the sound glu logic.
thanks a lot for the correction.
Yes your completely correct.
I corrected the picture and updated the posting also in text.
D41464C-12 = Dynamic RAM 64k X 4 Bit -120 Nanoseconds
EHP 8745 = Dynamic RAM 64k x 4 Bit - 150 Nanoseconds
so both are nearly same.... only differences are manufacturer and speed
the texas chips are a bit slower
is completely different
= 1 Meg x 1 Bit - 100 nanoseconds
not to get your hopes up but i may have a gs motherboard actually a complete unit--- are you still looking to get it working ... i will have to look in my storage area where i keep spare parts to make sure i do have one.
I don't have a way to get it working.
The nature of the problem is such that I have no means to get it to work.
It is beyond my capability at this point.
I would rather buy a replacement motherboard.
It is a more cost effective solution.
And even if I were to restore it to how it was working before, I believe that it will probably not eliminate the initial problem.
That is of course in mathematical terms.
I swapped many chips and in doing so the problem remained.
It would be a nightmare if it were to be repaired to the condition that it was before only to discover that the initial problem may not be taken care of.
I do not wish to waste any more of my time.
I shall sell these two motherboards for parts and repair only.
That is now the full extent of their usefulness.
There are currently 6 users online.