Crazy DIY iBook logic board repair!

10 posts / 0 new
Last post
Jon
Jon's picture
Offline
Last seen: 12 years 10 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2804
Crazy DIY iBook logic board repair!

We knew Markie (of geektechnique.org) had a wild streak at times. Now we have the proof that's beyond a streak. What's really crazy is that it worked.

Jon
Jon's picture
Offline
Last seen: 12 years 10 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2804
I posted a story to /. on it.

I posted a story to /. on it. I know Markie has been posted before. That ought to up the chances of another story on his work getting through.

eeun's picture
Offline
Last seen: 1 year 1 day ago
Joined: Dec 19 2003 - 17:34
Posts: 1895
[quote=Homer Simpson]I don't

I don't know the scientific explanation, but fire made it good

That's truly amazing.

Offline
Last seen: 1 year 2 months ago
Joined: Sep 23 2005 - 13:29
Posts: 316
!!!!

AWESOME!!!!

TheUltimateMacUser's picture
Offline
Last seen: 6 years 1 month ago
Joined: Jan 28 2004 - 12:14
Posts: 615
HOLY...

HOLY {censored]!!!! I cant believe that worked! Amazing!

coius's picture
Offline
Last seen: 10 years 2 weeks ago
Joined: Aug 25 2004 - 13:56
Posts: 1975
well that's the oddest way to do it...

at least it wasn't in warranty when he did that, apple would wonder about scorch marks if it went wrong. The coolest thing is that it shows that it can be done an alternative way to the hair dryer and block method (where you take a block of something and put it between the GPU and the case)
I gotta admit, he did a pretty job in figuring out something that might just work...

Dr. Webster's picture
Offline
Last seen: 22 hours 8 min ago
Joined: Dec 19 2003 - 17:34
Posts: 1747
Jeez, what a ham-fisted way o

Jeez, what a ham-fisted way of repairing a component. I'd be willing to bet he significantly reduced the life of the GPU.

Offline
Last seen: 17 years 3 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2
euhm, you really need to expl

euhm, you really need to explain to me how I can have reduced the lifespan of something that was (part of something) broken in the first place, how else should this GPU have life in it left?... ^_^

Next to that, for reflowing this BGA, you really need to put a certain amount of heat to the chip, one way or the other. My guess is that a lot of these boards got a reflow-job in apple's repair-program. Chances are the reflowing wasn't done as spectacular as I did, but still...

btw, I'm typing this on the fixed iBook, it really works well and without a hickup since the repair-job... now let's see how long it'll hold.

Dr. Webster's picture
Offline
Last seen: 22 hours 8 min ago
Joined: Dec 19 2003 - 17:34
Posts: 1747
Re: euhm, you really need to expl

euhm, you really need to explain to me how I can have reduced the lifespan of something that was (part of something) broken in the first place, how else should this GPU have life in it left?... ^_^

Next to that, for reflowing this BGA, you really need to put a certain amount of heat to the chip, one way or the other. My guess is that a lot of these boards got a reflow-job in apple's repair-program. Chances are the reflowing wasn't done as spectacular as I did, but still...

btw, I'm typing this on the fixed iBook, it really works well and without a hickup since the repair-job... now let's see how long it'll hold.

The chip wasn't designed to take that amount of heat. The fact it doesn't need a heatsink is proof enough that it doesn't get all that hot in normal operation. When they install BGA chips, they don't heat the chip to flow the solder; the solder is robotically applied to the pads and the chip is pressed in place before the solder cools.

I'm sure that BGA chips aren't really meant to be reflowed. I wouldn't be surprised if Apple's motherboard repair process was to simply remove the GPU, clean the board contacts, and install a brand new GPU with fresh solder.

Don't get me wrong, if you're reflowing process is reliable (as in, flexing the iBook the wrong way doesn't break the reflowed solder pads), more power to you. I just would have used a more controlled method (e.g. with a heat gun and temporary heat spreader on the chip).

Offline
Last seen: 17 years 3 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2
oh sure, I don't think BGA ch

oh sure, I don't think BGA chips are designed to be reflowed in the first place. But when they fail and there's no warranty whatsoever, it's the only option left for you and me next to making the whole thing a dust-collector.

But, somehow I guess (and sure, that's what it looks like too) everybody thinks I put an excessive amount of heat to the chip but I'm quite sure that the heat *under* the cup isn't all that excessive. If it would've been, I wouldn't have needed several runs with this, with more fuel than I expected etcetera. So, even though as primitive as it might seem, I guess it's quite controlled. The board/chips don't look one bit as if they have taken any amount of (excessive) heat, no reflowing of solder near the GPU or such. Next to that, this iBook really is working fine now.

No offence though and don't get me wrong too, I just fixed something that was broken and these were the only tools I had during the holidays for doing it.

Any way, happy new year to you all!

Log in or register to post comments