Hi again ! A problem with scsi harness (powercolour classic)

2 posts / 0 new
Last post
Offline
Last seen: 12 years 3 months ago
Joined: Mar 1 2004 - 22:18
Hi again ! A problem with scsi harness (powercolour classic)

I dont know the way to put the scsi cable into harness.Its very hard to put into metal points....someone could explain me a bit more please?

Thanks
Pedro-Spain.

eeun's picture
Offline
Last seen: 4 months 3 weeks ago
Joined: Dec 19 2003 - 17:34
Low-tech solution

I used a block of soft wood to connect my scsi cable to the harness.

I positioned the cable over the metal points, then used the end of the wood block to push the cable into the points.

You could also put the whole thing, including the wood, into a vise and press it together.

I used the end-grain of the wood (the end on which you can see the tree rings) to push in the cable, as it's soft and allows the pins to enter the wood slightly without bending them but still applies good pressure to the cable.

Log in or register to post comments