I have an Apple Cinema Display HD 30" (A1083) which has the DVI connector broken. I need the pinout of the DVI connector because the wiring scheme that iguana posted here a couple of years ago is for the 20/23 inch model, who use a single DVI link and I need the pinout of the dual link DVI.
Is someone able to post the 30" display wiring of the DVI connector or the service manual?
Many thanks.
Look at this link
http://www.interfacebus.com/Design_Connector_Digital_Visual_Interface_DVI_Bus.html
Cheers, Tom
Hello Tom.
First of all, THANKS.
But that's not what I need, I need to know what colour goes with each pin.
Thank you very much.
A continuity tester or a volt-ohm meter will quickly reveal what pin goes to what wire.
Just pick a pin then check for continuity across each wire, until you find the one that connects to that pin. Lather rinse repeat.
The problem is that there's no connector now. Only the cable and i have to solder a new connector...
I think that I have to throw the display away, huh?
Seems a shame to throw the whole thing out for want of a connector. Certainly there must be a cable from a broken display on ebay somewhere?
As for the pinout, does this help?
http://pinouts.ru/Video/dvi_pinout.shtml