If anyone has any experienc with Rhapsody/OS X Server 1.x, here's a question:
I can't install it on a 2400c. When the PB tries to boot from the OS X Server CD to begin installation, the screen stays black (backlight off), and it dumps into Open Firmware, saying "bootr, unknown word." In addition, the OS X Server System Disk Control Panel and System Disk Startup Extension don't work on the 2400c.
The bottom line is, Web reports say this OS will work on a 2400, but I cannot get the 2400 to boot from the OS X Server install CD. The CD itself is good -- the 2400 will recognize it, and will boot from the Mac OS 9.0 partition of the install CD. And I used the CD to successfully install OS X Server on a 7300.
I'm guessing the answer here lies in getting the 2400 to boot from the OS X Server CD's UFS partition by manually entering an Open Firmware prompt that includes the device address of that partition. But I don't know OF well enough to do that.
Failing that, does anyone know a way to copy my existing OS X Server installation from my 7300 to the internal HD of the 2400? Apparently OS X Server 1.x installations are machine-independent.