IBM G47 display

3 posts / 0 new
Last post
Offline
Last seen: 6 years 7 months ago
Joined: Apr 22 2004 - 15:37
IBM G47 display

I'm in a but of a quandry....

I have an IBM G47 17" display. It works great, except for one thing. The OSD buttons are locked. If one is pressed, the message "OSD IS LOCKED" appears on the display.

Of course, I don't have a manual for it, and the one on IBM's site did not mention anything about locking or unlocking the controls.

Any suggestions?

Thanks ahead of time!

boby_dg's picture
Offline
Last seen: 11 years 9 months ago
Joined: Jun 8 2004 - 15:14
This is simple

There is a small Enter button ot the monitor.It is used for entering the OSD menu and selecting something in it.It is also used ofr locking/unlocking it .
If the menu is locked press the enter button and hold it for 10 seconds.Then will appear "OSD unlocked"
If you want to lock it again press the enter button and hold it again for 10 second and - "OSD locked.
Cheers

Offline
Last seen: 6 years 7 months ago
Joined: Apr 22 2004 - 15:37
Thanks

thankyouthankyouthankyouthankyouthankyouthankyouthankyou Smile

Worked like a charm!

Log in or register to post comments