quicksilver dual processor in a digital audio

5 posts / 0 new
Last post
Offline
Last seen: 13 years 3 months ago
Joined: Jun 8 2004 - 15:14
quicksilver dual processor in a digital audio

hi gang - ive got a 733 digital audio and a dual gigahertz quicksilver processor - i assume im going to have to hack the fan and cooling some to get it to fit the larger dual heatsink and ive seen a pic and hints about needing 12 volts on some screw hole on the cpu card to make it work but nothing clear enough to tell which hole to connect to the 12 volts - any other tips or suggestions would be appreciated too - thanks in advance

Offline
Last seen: 2 months 3 weeks ago
Joined: Dec 20 2003 - 10:38
It's the one off by itself.

It's the one off by itself.

Offline
Last seen: 13 years 3 months ago
Joined: Jun 8 2004 - 15:14
thanks but...

there are 5 holes on the quicksilver dual gig cpu module - three are the same as the digital audio motherboard screw mounts - but there are two others and both are about as far apart as any other pair of holes - i really would like some clarification as i dont want to fry anything

Offline
Last seen: 2 months 3 weeks ago
Joined: Dec 20 2003 - 10:38
Post a pic and I'll show you.

Post a pic and I'll show you. If you have a multimeter it's the only one that's not conencted tot he ground plane.

Offline
Last seen: 13 years 3 months ago
Joined: Jun 8 2004 - 15:14
thanks a bunch

ill check it with a meter and see

Log in or register to post comments