"PowerBook 5300c"

22 posts / 0 new
Last post
CaryMG's picture
Offline
Last seen: 5 years 7 months ago
Joined: Dec 20 2003 - 10:38
"PowerBook 5300c"

Hey!

I'm about ta buy one for $35 ....
Is that a rip-off ?
Is the "PowerBook 5300c" a good computer?

Your thoughts, please ....

Later!
Smile Smile Smile

themike's picture
Offline
Last seen: 6 years 6 months ago
Joined: Jul 21 2004 - 19:33
[quote=Lowendmac.com]

Lowendmac.com wrote:

Overview

The PowerBook 5300 was Apple's first PowerBook based on a PowerPC CPU. Due to problems with the original (flaming) LithIon battery, plastic chipping from the case, and poor performance (among other things), it earns the dubious label of Road Apple. (It was also the butt of a lot of jokes.)

Still, despite limitations, the 5300 is a nice portable. Upgrading to Mac OS 8.1 or later makes it rock solid -- and it's a lot smaller than the PowerBook G3 Series with its huge 14.1" screen.

By modern standards, its biggest drawback is probably the 64 MB memory ceiling, which can be overcome using RAM Doubler or Virtual Memory.

PowerBook Hard Drives: The Essential Upgrade notes that there may be compatibility issues with EIDE drives larger than 8.2 GB, although this may be resolved by partitioning or using Mac OS 8.6 or later.

I'd go for it...

CaryMG's picture
Offline
Last seen: 5 years 7 months ago
Joined: Dec 20 2003 - 10:38
Hey Mike! Thank you for th

Hey Mike!

Thank you for the quick response!

The battery doesn't bother me as I'm gonna use the plug. lol

And the plastic chipping from the cases is no biggie, either, since I'm *very careful with my things.

But the "... poor performance ...."
Just how poor & in what *way?

And the "... among other things ...." part.
What "other things"?

Later!
Smile Smile Smile

themike's picture
Offline
Last seen: 6 years 6 months ago
Joined: Jul 21 2004 - 19:33
Heres the original page:

Heres the original pages:
http://lowendmac.com/pb2/5300.shtml
and
http://www.apple-history.com

Lowendmac claims a 64 MB memory ceiling, and apple-history claims a 100 mhz CPU, this might be what they mean.

Offline
Last seen: 4 years 8 months ago
Joined: Sep 16 2004 - 02:44
I have one actually...and can

I have one actually...and cant get it to see the powercord unless im holding it at just the right angle...and even then half the time it doesnt get power. If its in good shape it will make a fine machine...but they dont have a cd drive.

themike's picture
Offline
Last seen: 6 years 6 months ago
Joined: Jul 21 2004 - 19:33
I believe the CD drive was a

I believe the CD drive was a bay-swappable configuration.

CaryMG's picture
Offline
Last seen: 5 years 7 months ago
Joined: Dec 20 2003 - 10:38
OK ....

Mike > 64MBs of RAM & a 100MHz CPU ?
That's *perfect as I'm a HUGE classic computing afficianado! lol

Hackintosh > That problem you have with the plug -- is that just *your "PowerBook 5300c" computer, or is that a design element -- one that's present in *all "PowerBook 5300c" computers?
And no CD's kk!

Thanks!
CaryMG
Smile Smile Smile

Offline
Last seen: 7 years 8 months ago
Joined: Jun 27 2005 - 21:06
PowerBook 5300c

A CD drive is NOT an option on this machine, so installing software has to be done via floppy. So make sure it comes with the floppy drive. (Ethernet isn't built in, but can be added via a pc card; it does have infrared wireless built in, but that's very slow.) RAM is expensive, and 64MB is a low ceiling. This was the first generation PowerPC chip, and the (built in) 680x0 emulator is slow. Translation: even running (say) system 8.6, this machine is VERY slow. The only ways to speed it up are to get a copy of SpeedDoubler (no longer marketed) to improve 680x0 emulation, and, if you're really ambitious, to buy a large flash memory card and use it as your hard drive. (The 5300 will boot and run from a flash card initialized as a hard drive.)

But even with all this, a 5300 isn't very useful anymore. Just what do you plan to run on it? I used one of these for several years (still have it), so I'm speaking from experience.

CaryMG's picture
Offline
Last seen: 5 years 7 months ago
Joined: Dec 20 2003 - 10:38
Some Questions ....

jpendrick > I just wanna use it for classic computing.
Games ...
Word processing ...
Graphics & animation ....
Email ....
Maybe light websurfing ....

What if I was running "System 6" on a "PowerBook 5300c" computer.
* Would "System 6" work on a "PowerBook 5300c" computer?
* Would software meant ta run in "System 6" work on a "PowerBook 5300c" computer?
* Would the "PowerBook 5300c" computer still be slow using "System 6"?

Thank You!
CaryMG
Smile Smile Smile

Offline
Last seen: 12 years 7 months ago
Joined: Aug 15 2004 - 19:24
Not so fast . . .

Hey,

The only Apple powerbook that will run system 6 is the PB 100 and it will only run 6.0.8L.

dankephoto's picture
Offline
Last seen: 9 months 2 weeks ago
Joined: Dec 20 2003 - 10:38
PBs 5300

A) the power socket is failure prone (a serious understatement actually.) It can be resoldered, or replaced, either with an original style socket or with something else.

Dirol minimum OS is 7.5.x, so sys6 is not possible

C) 9.1 is actually faster in use than 8.x, with these caveats - max the RAM and use a modern fast HD (original HD is slooooooow.)

D) There's tons of contemporary apps, games, utils, etc. available for this era machine, you've just gotta limit your tasks to what was appropriate during its day. The WaMCom mozilla-based classic Mac OS web browser is a good starting point.

E) batteries for this series are seriously cheap. You can even use (though not charge) LiIon packs ($10-$20!!) intended for use in PBs3400/3500. You can with one of those expect runtimes approaching 10 hours, try that with any modern 'Book. Ehh, yeah, charging . . . just have to locate a VST external charger 3400 (NOT the 5300 charger!)

dan k

CaryMG's picture
Offline
Last seen: 5 years 7 months ago
Joined: Dec 20 2003 - 10:38
Thanks Again Guys!

Quick answers ....

I *like!

William > No "System 6" on a "PowerBook 5300c" computer? kk
Thanks for the heads up!

Danke > "System 7" it *is, then
* Where can I *get "System 7"?
* I looked at that "Replace The Power Supply" thingie ....
No way in *heck I can do that! lol
Would you recommend a repairshop as an alternative?
Or do ya know an online place that'd do what was shown in your link for a price?

Thanks!
CaryMG
Smile Smile Smile

P.S.
While on the subject of classic Macintosh computing, ya see that cool pic at the bottom of my last message?
It was made for 68000 macintosh computers.
Go here ta see it! ----> "Beyond CyberPunk!"
Smile Smile Smile

CaryMG's picture
Offline
Last seen: 5 years 7 months ago
Joined: Dec 20 2003 - 10:38
It's OK !!

I just talked to the guy I'm buying the "PowerBook 5300c" computer from & he assures me that the power supply thingie is SO not a problem!

But all the *other info you guys gave me was VERY helpful!!

Thank You!
Smile Smile Smile

coius's picture
Offline
Last seen: 4 years 3 months ago
Joined: Aug 25 2004 - 13:56
Be Careful!

Hi, I owned a PB 190cs for a while. Now... The 5300 is based off of the same design of the PB190, c'ept it has a slightly different board and CPU. They even share the same memory module. The reason I say carefull, is that I had a PSU melt down to the point it cracked open and started smoldering (Yes, it did happen to me) This was a HUGE problem as it has happened several times without warning. Has happened to the person that sold me the PowerBook (minus the power adapter) and I got a new one from apple. Same thing. I would not consider this a safe laptop unless you get a third-party PSU.
Another problem i had with them, is the power-jack has a poor soldering job on it, and the leads are so close to the board, it is hard to solder anything in it's place. I have tried. I can't tell you how many times that I have gone into it and tried new connectors. Mostly, I had to use connectors with wires that were soldered into the pin joints (after taking the plug off of the board) And, the power plugs are tempermental on BOTH the board and the PSU cord. On the PB board, the plugs are made out of cheap plastic and break the mold easily. Same on the powertip on the PSU, c'ept the problem is not the plastic casing, it is the size of the power tip's end in the plastic part that makes it prone to the wire coming unsoldered and short the PSU.

I recommend going 1400 or better. I would NOT recommend the 190/5300 to anyone who wishes to keep their sanity with the machine. If you like to have a machine that is down more time than it is working, go ahead. But is definatly deserves the Road apple recognition. And for $35, it is overpriced...

CaryMG's picture
Offline
Last seen: 5 years 7 months ago
Joined: Dec 20 2003 - 10:38
Thank You, Coius!

I just copy/pasted everything ya said & am gonna show it to the guy selling me the "PowerBook 5300c" computer.

I'll report back what he says.

Later!
Smile Smile Smile

CaryMG's picture
Offline
Last seen: 5 years 7 months ago
Joined: Dec 20 2003 - 10:38
What the -- ....?

themike wrote:

Still, despite limitations, the 5300 is a nice portable.
I'd go for it...

coius wrote:
I recommend going 1400 or better.
I would NOT recommend the 190/5300 to anyone who wishes to keep their sanity with the machine.
If you like to have a machine that is down more time than it is working, go ahead.
But is definatly deserves the Road apple recognition.
And for $35, it is overpriced...

LOL
Who do I *believe ???

Later!
:coolmac: :coolmac: :coolmac:

Dr. Webster's picture
Offline
Last seen: 7 hours 58 min ago
Joined: Dec 19 2003 - 17:34
The 5300, when it works, is a

The 5300, when it works, is a decent laptop.

However, keep in mind there was a major Apple recall regarding the reliabilty of the machine. Apple even continued to offer programs several years after the laptop was introduced that allowed owners to trade in their units for a substantial discount on a new machine (I believe this was around the time when the 3400 was still new).

For $35, you can do much better. I'd go for a 1400 or 3400 if you want a laptop, or you could get a beige G3 for around that price.

Offline
Last seen: 12 years 7 months ago
Joined: Aug 15 2004 - 19:24
On believing . . .

Hey,

What those contradictory posts show is that users can have extremely different responses to the same machine. What the good doctor points out is that there is a reliable history of predictable trouble with the 5300. If you are always rolling dice when buying used gear, in this case the dice are loaded. Let me put it this way: I have almost a dozen laptops and none of them are a 5300. And none ever will be . . .

CaryMG's picture
Offline
Last seen: 5 years 7 months ago
Joined: Dec 20 2003 - 10:38
I Think I've Got It Now ....

William Hearn > Well said ....
I know what ta do now ....

Dr. Webster > You must be *psychic! lol
One of the *other laptops being offered for sale by the same seller is a "PowerBook 1400cs 117". lol
But the price is out of my range.

He *also has a "PowerBook 540c" computer that I was thinking about getting as an alternative.
Here it is ----> "PowerBook540c" Computer
It's $35.

Is the "PowerBook 540c" a good computer?
And is $35 an OK price?

Thank You!
:coolmac: :coolmac: :coolmac:

Offline
Last seen: 12 years 7 months ago
Joined: Aug 15 2004 - 19:24
Blackbird singing . . .

Hey,

540c is a really nice laptop that even has upgrade paths. Apple made a lot of them so there are parts readily available. $35 might be too much depending on the configuration but that's your call. Funny that a 68k powerbook and a PPC powerbook have the same price . . .

CaryMG's picture
Offline
Last seen: 5 years 7 months ago
Joined: Dec 20 2003 - 10:38
Okey-Dokey !

Thanks for all the help, williamahearn & everyone else!

I just paid for the "APPLE PowerBook 540c" computer & it should be here any day now!

Thanks again for everything!

Later!
Smile Smile Smile

FunnymanSE30's picture
Offline
Last seen: 6 years 2 months ago
Joined: Aug 22 2005 - 10:32
a few companies made ppc upgr

a few companies made ppc upgrades for the 540c. i would like to find one of those or a duo, they are neat.

Log in or register to post comments