Embedded

some_tools_and_the_template

Submitted by doug-doug the mighty on November 7, 2005 - 6:59pm
Taxonomy: 
Embedded

original_bracket

Submitted by doug-doug the mighty on November 7, 2005 - 6:59pm
Taxonomy: 
Embedded

10_inches_of_poorly_used_space

Submitted by doug-doug the mighty on November 7, 2005 - 6:58pm
Taxonomy: 
Embedded

so_much_wasted_space

Submitted by doug-doug the mighty on November 7, 2005 - 6:58pm
Taxonomy: 
Embedded

iMac Block Diagram

Submitted by vantage point on November 7, 2005 - 1:54pm
Taxonomy: 
Embedded

366 Setup of XP

Submitted by coius on October 21, 2005 - 6:49pm

This is the environment in which the Celeron 366 is running XP

Taxonomy: 
Embedded
Other

xp366emachines1

Submitted by coius on October 21, 2005 - 6:47pm

document of the Celeron 366 Machine running windows

Taxonomy: 
Embedded
Other

Front of AIO Sled with HD and CD-RW

Submitted by coius on October 18, 2005 - 8:53pm

this is the front of the AIO G3 Sled (Everything that is the system [board, HD, CD-Rom, Floppy, PCI] fits on this sled.) It has the Hacked-in HDD (The original 4GB) in the Zip Drive bay. I had to add a 3-connector (2 device, 1 controller) 80-wire UATA IDE Cable to do it. The HD fits on the CD-Rom Channel of the AIO. It works very good. Not sure what to do with the small amount of space though...

Taxonomy: 
Apple
Embedded

Beige back

Submitted by coius on October 18, 2005 - 8:48pm

This is the back of the AIO that I have. It has the Personality card in place at where the internal CRT connects to. also, there is a 10/100Mbps Ethernet Card (D-Link DL-530tx+) and a Belkin 5-Port USB 2.0 PCI Card.

Taxonomy: 
Apple
Embedded

Beige board

Submitted by coius on October 18, 2005 - 8:43pm

This is the AIO Board that I added the second HD into the original Zip drive bay.
They HD is in the upper-left corner

Taxonomy: 
Apple
Embedded

Pages

Subscribe to Embedded