Apple II

WiModem232 for the Apple II

Today my WiModem232 arrived.

It is an awesome modern Modem for the Apple II. It is working very well with the Super Serial Card and any "modern" communication program, but as well with the Apple Communication Card and the first communication programs like VisiTerm or Data Capture.

The little LCD screen is nice, but you don't need it. You can work with the Modem just with your favorite terminal program.

Here are some pics:

Forums: 

Finally....my Vulcan GS can use a 512mb CF card...

Got it working to use the entire 512mb card...

Forums: 

Apple /// with Astec PSU AA11190 - from 110V-to-230V - how to mod properly and what solution is the best

I am currently renovating my Apple III (US model, PSU Astec AA11190)and I want to choose the best, safest solution to make it work in Europe. There are two options: to mod its PSU (here I need confirmation how to do it properly) or to use 230/110V transformer instead...

Forums: 

Sider ][ backup disks

I have a set of old backup disks for a Sider ][ hard drive I had back in the 80s. I'd love to be able to extract the data, but I haven't been successful so far. Here's a little backstory for context:

Forums: 

Bizarre - ?

Bizarre stuff...

Forums: 

How to read and interpret Apple //(e) monitor error codes like ...

"-0803 A=00 X=60 Y=00 P=34 S=F5" ?

Is there anyone able to explain or is there a describing document available anywhere?

Many thanks in advance

Forums: 

Holiday Reading

If you are looking for the material to get into
over the holiday period (or just looking for some material
to read) then check out the link below. They have books
which are not found on an archive site that I have
found and are adding to it regularly.

http://www.bombjack.org/apple/apple-books.htm

Forums: 

Apple II Games

I need some help from Apple II gamers

Forums: 

dynamo 8-bit development package

Is anyone familiar with this or know about it?

Here is a link with some details.

http://www.mactech.com/articles/develop/issue_01/dynamo.html

Forums: 

Drive 2 connector not working on Disk ][ Interface card

Hello!

The Drive 2 connector is not working on my Disk ][ interface card.

The drives I'm using power on OK in the Drive 1 connector, so it must be the connector or some of the circuitry.

There does not appear to be physical damage to the connector - is there any particular IC I should check / replace?

Forums: 

Pages

Subscribe to Apple II