PM 8100 w/ NewerTech PDS G3 upgrade probs. this is a 220mhz

5 posts / 0 new
Last post
Offline
Last seen: 19 years 1 month ago
Joined: Feb 15 2004 - 19:31
Posts: 3
PM 8100 w/ NewerTech PDS G3 upgrade probs. this is a 220mhz

well i have a 8100 with a newertech g3 upgrade, so i hook up the pds av card to the pass thru and the system boots almost and hangs... I dont have the kit to mount the card in securly. Would removing the cache simm help this is a 220mhz g3

Reverend Darkness's picture
Offline
Last seen: 8 years 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 502
Be a little more descriptive, please...

I don't know that removing the cache would help. Please try and describe where the computer hangs in more detail.

Also, have you tried booting it without the PDS AV card connected to the pass thru?

Offline
Last seen: 19 years 1 month ago
Joined: Feb 15 2004 - 19:31
Posts: 3
Same thing

runs fine without the PDS av card attached to the pass thru the cache module has been removed too.. 640x480 on a 1710 is hell

BlackScorpion's picture
Offline
Last seen: 4 months 3 weeks ago
Joined: Dec 20 2003 - 10:38
Posts: 38
Sounds like the 8100 that was

Sounds like the 8100 that was STOLEN from me by Dr_Zoidberg aka Steve Landon. If any one else got stiffed by this guy e-mail me, i have my attorney gathering the info to file charges against him for theft. PM me or e-mail me.

Dog
Offline
Last seen: 17 years 8 months ago
Joined: Dec 20 2003 - 10:38
Posts: 46
Yeah um. . .

If you got the 8100 from him, that's probably my old NewerTech card too. Should have come with the box and software in that case.

As for you problem, when I benched the card in a 6100 and an AV card attached to the passthru it worked fine. So, i'd suggest you find the latest software/extensions you can, boot it clean (I think theres a key you hold down to disable extensions while booting), install/replace software/extensions, cross fingers/pray to your god/hope and reboot. Oh yeah, before you reboot, find the CUDA/Programmer's Switch (it's on the mainboard somewhere) to clear that out, and reset your PRAM too.

Dog
and 2 64mb sticks.

Log in or register to post comments