firmware update?

6 posts / 0 new
Last post
Offline
Last seen: 18 years 2 months ago
Joined: Jan 23 2005 - 20:28
Posts: 159
firmware update?

hi

if i update the firmware on my beige g3 would it get rid of the 8gb partion? any answers are appreciated.

thanx

Offline
Last seen: 6 years 12 months ago
Joined: Dec 20 2003 - 10:38
Posts: 455
No, a firmware update should

No, a firmware update should not affect the hard drive. When you are upgrading the firmware, bascially what you are doing is you first erase the data on the firmware chip then rewrite it with new information but it really doesn't have anything to do with the hard drive.

However you are saying you have a beige, when you are talking about upda5ting the firmware, are you referring to replacing your rom chip? (i didn't know that there were firmware updates for the beige series).

Offline
Last seen: 18 years 2 months ago
Joined: Jan 23 2005 - 20:28
Posts: 159
thats not what i meant

i meant if i update the firmware will it get rid of the 8gb limit for when you are installing osx. as far as i know theres firmware updates for it.......

Offline
Last seen: 11 hours 54 sec ago
Joined: Dec 20 2003 - 10:38
Posts: 570
No it won't. My previous comp

No it won't. My previous computer was a beige G3 with the last ROM and OSX just wouldn't work without being on that miserable 8gb partition. The only way you're going to get rid of it is to update to a newer computer.

Wayne

Offline
Last seen: 18 years 2 months ago
Joined: Jan 23 2005 - 20:28
Posts: 159
how about....

how about if you put the drive in another computer install osx and then put it back in the beige and use it?

dankephoto's picture
Offline
Last seen: 9 months 1 week ago
Joined: Dec 20 2003 - 10:38
Posts: 1899
no

firmware, only hardware ROM, and thus cannot be updated. Well, there are several ROM versions, but all are similarly afflicted with the 8GB boot partition limit on their onboard ATA busses. The SCSI bus does not have this limit, nor would drives attached to an appropriate PCI adapter.

dan k

Log in or register to post comments