supposed to be part no 922-0621 for carrier and 922-0804 (or could be compactible) for ribbon
would like if both items could be shipped quickly too
probably willing to spend $10cdn total flat for both items in good condition (ribbon fully works too)
I'll like it if the ribbon was either original or as compactible as possible since I'm ratherly planning to possible put a card in so I don't want too much ribbon slacks, thanks
I have these two items on stock you can have them both for 10 Dollar + stamps.
Please leave your email address here or visit my store at
and fill out a contact form there (carriers are on page 28 of the site, w/o picture!)
I'm actually in east canada by the way
oversea shipping might not even be worth the thought....thanks for trying still.
I had noticed that store before...a lot of nice rare items, the only thing that kinda slightly trouble me is they seem overpriced like 499 euro for a G4/400, they actually go for more like close to half of that around here ($300-$400cdn)
I am SE US. I have some of these sleds to spare (let's say $1.50 (USD) per piece).
As far as cables go, I *might* have one for you, but I need to know how long and how many connectors you need in order to locate one in my heap. Send me a PM and let me know how many sleds you want and your exact address so I can figure shipping costs.
Would cost 5 euro to ship to Canada...
I will have to dig around for the box of SCSI stuff - not sure if I have a cable for that. All of these items are boxed up in preps for my cross-town move. I know where the boxes are, but I may not be able to get stuff out of them for a day or two as they are buried - I still have time since the move happens on the 20th, just need to dig my way in...
BTW, your account profile does not allow you to accept private messages. To change this, you would need to go to your profile, select the EDIT tab, choose Accounts settings, and then go down to the check box to allow PMs...
...unless that was intentional...
thanks for all of your help anyway but after looking at it especially the costs I decided to junk this project and rather work on a more interesting one with my present performa.
thanks for your replies still