Replica I Cases?

7 posts / 0 new
Last post
Offline
Last seen: 16 years 4 months ago
Joined: Oct 3 2004 - 18:34
Posts: 6
Replica I Cases?

What kind of cases have people been using for their Replica I's?

Can anyone recommend an off-the-shelf case that I can buy to mount a Replica I in?

i.e.: A case I can easily modify to take the necessary powersupply, and then to mount the board to...

Offline
Last seen: 19 years 5 months ago
Joined: Mar 23 2005 - 06:20
Posts: 19
Re: Replica I Cases?

What kind of cases have people been using for their Replica I's?

Can anyone recommend an off-the-shelf case that I can buy to mount a Replica I in?

i.e.: A case I can easily modify to take the necessary powersupply, and then to mount the board to...

Well, given that the necessary power supply is an AT sort of thing, any good old 486 minitower will do the job. You may need to make some significant modifications to it to mount the logic board, and you're going to have lots of room for drives that you won't use most likely, but if you want ready-made, that's what you'd work with. Bonus if you are using an AT or PS/2 keyboard since the case would match it.

You might also get by with an external drive enclosure if you could find one with enough empty space inside it.

I'm going to look at getting some of the plastic that white G5-alike is made of and see if I can make something that looks nice out of it. Don't know if I want white or black yet, but I know that beige is right out. Wink

Offline
Last seen: 16 years 4 months ago
Joined: Oct 3 2004 - 18:34
Posts: 6
Re: Replica I Cases?

Well...

I *know* that, but... I was hoping there was a more plain case that could be used.

Since I don't know if we will ever get the Cassette interface, and definitely won't get a disk or hdd interface for it...

I'm not needing something as large, bulky and yucky as an AT case.

I was thinking more of one of those small book sized cases.

A shame that an ATX connector for power wasn't used rather than an AT connector. It would make the selection of cases much larger.

I guess I'll have to go the route of building my own case like you've suggested.

I've got to get some $$$ together and order a unit. I've been putting it off for awhile, but I'm itching to play with a computer for fun, and constantly reloading my XP box isn't fun anymore...

Offline
Last seen: 10 years 7 months ago
Joined: Dec 20 2003 - 10:38
Posts: 149
Couldnt you make an adaptet f

Couldnt you make an adaptet form ATX plug to AT plug?

AT Connector 1

Green Power Good
Red +5V
Yellow +12V
Blue -12V
Black Ground
Black Ground

AT Connector 2

Black Ground
Black Ground
White -5V
Red +5V
Red +5V
Red +5V

ATX Connector

IMAGE(http://xtronics.com/reference/images/atx_pinout.GIF)

Pin Signal Wire Color
1 +3.3Vdc Orange
2 +3.3Vdc Orange
3 GND Black
4 +5Vdc Red
5 GND Black
6 +5Vdc Red
7 GND Black
8 PWR-OK Gray
9 +5Vdc
VSB
standby Voltage Purple
10 +12Vdc Yellow
11 +3.3Vdc Orange
{brown is 3.3Vdc
sense]
12 -12Vdc Blue
13 GND Black
14 PS-ON Green
15 GND Black
16 GND Black
17 GND Black
18 -5Vdc White
19 +5Vdc Red
20 +5Vdc Red

All you mainly have to do is connect color to color. And mebby green to grey

Offline
Last seen: 19 years 5 months ago
Joined: Mar 23 2005 - 06:20
Posts: 19
power good

What do you do with pin 8 on the ATX supply to make it power on again? (I can't remember..)

Offline
Last seen: 1 month 3 weeks ago
Joined: Dec 20 2003 - 10:38
Posts: 249
I can't remember the 2 pin nu

I can't remember the 2 pin numbers right now and I'm not at home to look it up but if you research the ATX you will find the power on gets jumpered to the connector next to it (going off memory) and that brings the ATX up. So you just need to connect that to an external switch for power up. Now, there are adapters out there (I have 1) that allow you to attach an ATX power supply to a P8/P9 style computer. Do a google for ATX to P8P9 and you'll find it.

Offline
Last seen: 19 years 2 months ago
Joined: Apr 21 2005 - 20:33
Posts: 4
http://www.snotmonkey.com/gal

http://www.snotmonkey.com/gallery/albums/atx2at/P1010037.jpg

Log in or register to post comments