Port Forwarding Mac OS X

12 posts / 0 new
Last post
moros's picture
Offline
Last seen: 12 years 3 months ago
Joined: Jan 21 2005 - 08:16
Posts: 65
Port Forwarding Mac OS X

I would like to know how (if possible) to forward ports on mac os x. First, Here's an outline of my setup:

1) Beige G3 connected to the Internet downstairs
2) 2 blue and whites connected via a hub upstairs.

The Beige is running 10.3.9 client, the blue and whites are running 10.4.3, one client and one server.

What I'd like to do is to forward port 80 (to start with) to the lue and white running 10.4 server.

I'm gussing, due to UNIX's age and networking caperbilities that it'll have a command to do this, i've read the man page of ipfw but I odn't quite understand it. THeres a guide to doing it with server here:

http://www.cyberhq.nl/2005/06/30/port-forwarding-in-macos-x.html

but I cant install 10.4 server on the beige and so was wondering whether it'd be possible under 10.3.9 client??

Cheers,

Moros

Offline
Last seen: 18 years 1 month ago
Joined: Jan 22 2005 - 20:20
Posts: 595
You don't explain what it is that you're trying to do.

What exactly is it that you're trying to do?

You want http requests to be forwarded to one of your blue & white powermacs. That much is clear. What is it, though, that you want to accomplish?

Are your computers sharing an internet connection and you want to run a web server on one of your machines? Are you trying to setup a little family intranet and you want one of your machines to be a server?

Are you using a dedicated router?

You should provide more details.

catmistake's picture
Offline
Last seen: 2 years 4 months ago
Joined: Dec 20 2003 - 10:38
Posts: 1100
Command Line

open
/Applications/Utilities/Terminal

type
man route

(just a place to start)

Offline
Last seen: 18 years 1 month ago
Joined: Jan 22 2005 - 20:20
Posts: 595
Or if you're using a hardware router...

Or, if you're using a hardware router, don't even bother. Just open up your web browser, enter the IP address of your router (or domain name if your host files are properly configured and/or you're running DNS), and set your router to forward requests on port 80 to the IP address of the blue & white Mac you want to use.

Actually, if you *are* using your computers behind a hardware router, and you want to serve http to the Internet, you're going to have to set something up in your router anyway. Either you're going to have to make your B&W a demilitarized zone or you're going to have to open up the relevant ports. And, as you might imagine, if you do that, there'll be no need to configure your Macs to port forward.

catmistake's picture
Offline
Last seen: 2 years 4 months ago
Joined: Dec 20 2003 - 10:38
Posts: 1100
I can think of one

good reason...

moros's picture
Offline
Last seen: 12 years 3 months ago
Joined: Jan 21 2005 - 08:16
Posts: 65
what I'm trying to do

At the moment y website is hosted on the beige, which is also a little slow and short on disc space. As a result I'd like to have the site served on th Blue and White...

I guess the easiest way to go would just be to buy a router/modem thingy, but i don't have $60 to spend at the moment Sad

Moros

Offline
Last seen: 18 years 1 month ago
Joined: Jan 22 2005 - 20:20
Posts: 595
Oh, I see...

If you don't mind my asking, how are you currently connecting your machines to the Internet? Do you have just your beige on the Internet? Or are you using a switch?

moros's picture
Offline
Last seen: 12 years 3 months ago
Joined: Jan 21 2005 - 08:16
Posts: 65
The Beige is connected to the

The Beige is connected to the internet via a USB modem, and using the sharing prefs sharing it over the inbuilt ethernet interface.

The Ethernet is connected to a hub, and then two other compters are connected to the hub.

I hope this makes my setup clear Blum 3

Moros

Offline
Last seen: 18 years 1 month ago
Joined: Jan 22 2005 - 20:20
Posts: 595
How about connecting the modem to...

How about just connecting the USB modem to one of the Blue & Whites then? Didn't you say that you wanted to eliminate your beige?

I didn't think that USB modems worked with the Mac. I've had both DSL and Cable broadband connections and none of them supported the Mac via USB.

Just out of curiousity, has anyone ever misspelled your name with an "n" as opposed to an "s"?

Yes, your setup is much more clear now.

moros's picture
Offline
Last seen: 12 years 3 months ago
Joined: Jan 21 2005 - 08:16
Posts: 65
I suppose…

I guess I could just move the modem upstairs, I guess I'll do that unitl i get a router Blum 3

On the subject of the USB modem, it works actually pretty damn well. This is an ADSL connection with Tiscali, the best in the UK IMHO, as aladds will agree. I did have a PCI modem but due to the slow bus speed (I think) of the beige I only got 512Kbs instead of 1Mbs…

And, finally, so-far no one's mis-spelt my name, so don't be tempted to try!!

Moros

Offline
Last seen: 18 years 1 month ago
Joined: Jan 22 2005 - 20:20
Posts: 595
Wouldn't dream of it...

And, finally, so-far no one's mis-spelt my name, so don't be tempted to try!!

I wouldn't dream of it. Wink On a lighter note, I met a guy a couple of years ago who had the last name, Morone. We'd always "erroneously" forget to add the "e" at the end. Smile

On the subject of the USB modem, it works actually pretty damn well. This is an ADSL connection with Tiscali, the best in the UK IMHO, as aladds will agree. I did have a PCI modem but due to the slow bus speed (I think) of the beige I only got 512Kbs instead of 1Mbs…

Wait a minute! Am I missing something here?

The beige does not have any native USB ports. To add USB to a beige, you have to place a USB card in a PCI slot. Consequently, the bus speed of the beige would not vary between a USB modem connected via PCI-based USB card, and any other PCI card.

The PCI bus runs at the same constant speed, regardless of what is plugged into the PCI slots.

Anyway, I'm glad that you've solved your dilemma.

moros's picture
Offline
Last seen: 12 years 3 months ago
Joined: Jan 21 2005 - 08:16
Posts: 65
good point...

The beige does not have any native USB ports. To add USB to a beige, you have to place a USB card in a PCI slot. Consequently, the bus speed of the beige would not vary between a USB modem connected via PCI-based USB card, and any other PCI card.

The PCI bus runs at the same constant speed, regardless of what is plugged into the PCI slots.


Extremely good point. I've no idea why the card was slower then, it said up to 8Mbs on the box...

Moros

Log in or register to post comments