YDL on Powerbase as Firewall

5 posts / 0 new
Last post
Hokusai's picture
Offline
Last seen: 1 day 20 hours ago
Joined: Dec 20 2003 - 10:38
Posts: 256
YDL on Powerbase as Firewall

You see, I have a G3 upgraded Powerbase lying around and a copy of Yellow Dog Linux 3.0.1 as well. So, I've got to thinking about setting up a dedicated firewall for my personal network. Not for my whole LAN mind you.

I don't want a complete how-to on it (I wouldn't mind), but I want to know if anyone has any opinions on this. Do you think my Powerbase will be able to handle it fine enough?

coius's picture
Offline
Last seen: 10 years 2 weeks ago
Joined: Aug 25 2004 - 13:56
Posts: 1975
it's powerful enough

but keep in mind, there is going to be a limit of how many things you can put on the network, before you are going to see noticable slowdowns. IIRC, I have seen someone use a Quadra 840 for a FireWall and router. I think they got 14 computers going thru it, before they saw a slowdown on it. Basically, it comes down to how much data it can move thru the bus on the system. between the network card, and CPU. but I wouldn't use YDL. It is a port of RedHat for PPC, and that is god-aweful slow. Plus, not everything in that version works on the powerbase/6400. You might want to try ubuntu. As it was a Native PPC Build to begin with.

aladds's picture
Offline
Last seen: 1 month 3 days ago
Joined: Dec 26 2003 - 16:21
Posts: 298
Debian

Install Debian, but only install the absolute minimum. Don't bother with X11 as it'll just slow it down. It is also very easy to set up and configure because of APT.

coius's picture
Offline
Last seen: 10 years 2 weeks ago
Joined: Aug 25 2004 - 13:56
Posts: 1975
yeah, I guess that will work too

mostly, you want to get the least CPU time consuming OS on it. So, if you have just command line, it works even better

Hokusai's picture
Offline
Last seen: 1 day 20 hours ago
Joined: Dec 20 2003 - 10:38
Posts: 256
Hmm...

Hmm, good suggestions. Thanks...

Log in or register to post comments