damn old packard bell

5 posts / 0 new
Last post
Offline
Last seen: 19 years 2 months ago
Joined: May 15 2004 - 23:10
Posts: 1
damn old packard bell

i got an old packard bell, cool huh. well i want to install 95b on the damn thing and i got no clues on how im supposed to go about it. i cant get it to boot from cd rom. ive seen articles in here about this but dont quite know how to go about this, could someone please help

Dr. Webster's picture
Offline
Last seen: 13 hours 15 min ago
Joined: Dec 19 2003 - 17:34
Posts: 1747
Step 1: Remove CD from the co

Step 1: Remove CD from the computer.
Step 2: Power down the computer.
Step 3: Disconnect all cables from the computer.
Step 4: Throw computer into closest trash receptacle.
Step 5: Get new computer.

Packard Bell = teh suxors.

olikicksmacs's picture
Offline
Last seen: 8 years 9 months ago
Joined: Dec 20 2003 - 10:38
Posts: 252
I know!

Dont be cruel Dr. Webster!!

1) Get a boot disk from www.bootdisk.com (the windows 98se one works best)
2) let it boot with cd support (theres an option)
3) type in: format c:, then press enter
4) type y, then press enter
5) When its finished, type in a hard drive name or leave it blank and press enter.
6) type: d:, press enter
7) type: setup and press enter.
Dirol Then set up windows as usual.

Hope it works!!

Oli

Offline
Last seen: 19 years 2 months ago
Joined: Dec 20 2003 - 10:38
Posts: 17
I got two old PCs one with a

I got two old PCs one with a Cyrix 300 and one with a 233 MHz AMD K6. In both cases Installing W95 and also W98SE is a sea of trouble. Intalling is no problem but when it boots the first time from the C drive it cant find the CD drive and thus not install a lot of cab files were various drivers are.

I am pretty close to throwing them out. Browsed Samsung web site for old CD drivers but there was nothing. there must be a way to get the generic CD drivers from the boot floppy to the C drive and then hack the config files somewere. It feels like back in DOS 2.11 and Word Perfect days...

Offline
Last seen: 12 years 4 months ago
Joined: Apr 22 2004 - 15:37
Posts: 378
Getting to system files

When I set up Windows 9x, I usually make the folder C:\Windows\Options\Cabs, then copy the files from the CD under the Win95/Win98 folder to the one I make. Then I'll install from the folder I made. It allows you to have all needed files on the hard disk, preventing Windows from repeatedly asking you for the CD. It take 100+ MB to do it, but it's worth it for me just for the time savings.

Log in or register to post comments