Lombard won't boot from Panther CD

4 posts / 0 new
Last post
Offline
Last seen: 1 year 3 months ago
Joined: Dec 20 2003 - 10:38
Posts: 110
Lombard won't boot from Panther CD

When I try to boot my Lombard from Panther CD's, it goes to open firmware with "Default Catch!, code=400 at %SRR0: 30800010 %SRR1: 40003030" I have googled my poor little fingers raw, and don't know what it's all about. I have replace the 256mb ram in the upper slot with something smaller (the 256mb stick in the upper slot causes a video issue when installing panther, so i thought maybe it was causing my current problem)

Am I just stuck with 10.2 or less?

Thanks in advance,

CM

Offline
Last seen: 1 year 3 months ago
Joined: Dec 20 2003 - 10:38
Posts: 110
Problem solved

Cleaned the lens in the cd-rom module.

Thanks anyway,

CM

Offline
Last seen: 2 months 3 weeks ago
Joined: Aug 22 2005 - 10:32
Posts: 404
i was going to suggest that,

i was going to suggest that, becuase 10.3 installed just fine on my lombard

Offline
Last seen: 3 months 1 week ago
Joined: Jan 19 2005 - 23:30
Posts: 700
are we the group of people wh

are we the group of people who bought the lombard off ebay? Smile

Log in or register to post comments