Installing PIONEER DVD-RW DVR-K05 in PBTi

28 posts / 0 new
Last post
Offline
Last seen: 18 years 1 month ago
Joined: Oct 21 2006 - 01:01
Posts: 8
Installing PIONEER DVD-RW DVR-K05 in PBTi

I installed a PIONEER DVD-RW DVR-K05 in my powerbook. The computer recognizes it and i can play dvds and cds, but I cannot burn DVDs.
I downloaded Patchburn and when I ran it, it says:
"The selected CD/DVD writer is already supported by patchbur 3, apple or another vendor. no need to patch anything"

I have no idea what to do to fix this problem. any ideas?

My computer information is:

Machine Model: PowerBook G4
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 667 MHz
L2 Cache (per CPU): 256 KB
Memory: 768 MB
Bus Speed: 133 MHz
Boot ROM Version: 4.2.9f1

My computer reads the DVD player as follows:
ATA-3 Bus:

PIONEER DVD-RW DVR-K05:

Manufacturer: PIONEER
Model: PIONEER DVD-RW DVR-K05
Revision: 1.03
Drive Type: CD-RW/DVD-RW
Disc Burning: Vendor Supported
Removable Media: Yes
Detachable Drive: No
Protocol: ATAPI
Unit Number: 1
Socket Type: Internal

Thanks in advanced

Offline
Last seen: 1 year 11 months ago
Joined: Sep 23 2005 - 13:29
Posts: 316
hmmm...

I may have missed it, but what version of X are you running?
If it is 10.4.3 or higher, it should support this drive just fine...
and, it is showing up as firmware version 1.03, which as near as I can tell is the latest firmware for this drive....

very interesting.

EDIT: you said patchburn 3... if you are running 10.4, you should be using patchburn 4.

also, I think (not 100% sure though) that you may need to update to 10.4 and use patchburn 4 if you are only running 10.3 now.

Offline
Last seen: 1 year 5 months ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Did similar, found some difficulties

I did a similar installation on my TiPowerbook 500, also with a Pioneer drive (not sure if it's the same one, but I think so), also used patchburn.

There are a couple of things that are not enabled with Patchburn (maybe I should check the website to see if any of these have changed but. . .);
-Patchburn only allows a dual sided DVD burner to act as a single sided DVD burner.
-As a storage device for the Finder Program you can burn both DVD-R's and DVD+R's, but Apple issued software (iDVD, iTunes) will only recognize DVD-R's.

Mutant Pie

Offline
Last seen: 1 year 11 months ago
Joined: Sep 23 2005 - 13:29
Posts: 316
...

native iApp support with 10.4 and higher and patchburn 4.
dual layer support.

worked for my pioneer dvr-110 (5.25" drive, external firewire enclosure)

edit: the above post stated that iDVD and iTunes would only recognize DVD-R using this method while the finder would support DVD-R and DVD+R.
While I no longer think that this is the case with 10.4 and patchburn 4, I cannot confirm it. The DVD spindles I have at home are DVD-R and DVD+R DL. I seem to remember using some DVD+R media when I brought my machine over to a friends house and used his blanks, but I cannot say for certian.
I CAN say that with 10.4 I do have Native iApp support, and support for Dual Layer burning, even in iDVD. I can also add that the same friend i mentioned above owns a 20" G5 iMac ALS Model (no camera)[iMacs use laptop DVD drives] and his internal Matsushita (Panasonic) DVD burner had a mechanical failure, when he recieved his "install it yourself" warranty replacement it was a Pioneer K-05 drive (of coures, it did have the apple logo on it, but it was a pioneer drive none the less)

Offline
Last seen: 1 year 5 months ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Dual layer, dual side support

Mac Help
Index

Finding what types of CD and DVD media you can burn
If your computer has an internal or external recordable optical drive supported by Apple, you can "burn" or record your favorite music, applications, documents, digital photos and video, and other digital files to recordable CD and DVD discs. You can create your own music CDs and play them on a standard audio player, or create DVDs with movies and slideshows and play them on a DVD player.

Not all optical disc drives can burn all types of optical discs. If your Macintosh has a SuperDrive, it can burn DVDs and CDs. If it has a Combo Drive, it can burn only CDs. For more detailed information on what kinds of discs your drive can burn, use the System Profiler.

To see what types of discs you can burn:
Open System Profiler, located in /Applications/Utilities.
Select Disc Burning in the Hardware list.
If more than one disc drive is connected to your computer, select the one you want to use from the list of drives.
Look at the entries for "CD-Write" and "DVD-Write." They should contain items like "+R," "-RW," or "+R DL." To find out what these items are, click the link below.
To see the supported burning speed, insert a blank disc in the drive.

-Using the above information in the Mac Help, I got the following info;
PIONEER DVD-RW DVR-K05:

Firmware Revision: 1.03
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No

So apparantly OS 10.4.8 does recognize the dual layer burning capability but I guess that's for DVD+R DL. I haven't tried it with iTunes 7.0.1 or the latest version of iDVD yet with a DVD+R, but with version iTunes v6.? and iDVD v4.0.1 it didn't recognize them.

Mutant Pie

Offline
Last seen: 1 year 11 months ago
Joined: Sep 23 2005 - 13:29
Posts: 316
hmm

I wonder if the orig. poster is even checking in on his thread? Biggrin

Offline
Last seen: 18 years 1 month ago
Joined: Oct 21 2006 - 01:01
Posts: 8
Yes I am

I have been checking and trying all the suggestions. I appreciate everyone's comments. however, short of updating to 10.4, the other suggestions are not working.

Offline
Last seen: 18 years 1 month ago
Joined: Oct 21 2006 - 01:01
Posts: 8
OS version

Hi and thanks for the reply.
I'm using 10.3.9 and that's why I had to use patch 3.
I don't know if I have the budget to update to 10.4 yet. I'm actually ready to just buy a whole new laptop if i'm going to spend more money on this guy.

Offline
Last seen: 18 years 1 month ago
Joined: Oct 21 2006 - 01:01
Posts: 8
Re: Dual layer, dual side support

PIONEER DVD-RW DVR-K05:

Firmware Revision: 1.03
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No

So apparantly OS 10.4.8 does recognize the dual layer burning capability but I guess that's for DVD+R DL. I haven't tried it with iTunes 7.0.1 or the latest version of iDVD yet with a DVD+R, but with version iTunes v6.? and iDVD v4.0.1 it didn't recognize them.

Mutant Pie[/quote]

I pasted what my hardware profile says above. none of those details are included in it. what OS are you using?

dankephoto's picture
Offline
Last seen: 1 year 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 1899
heh?

My 667 DVI TiBook is nearly exactly the same config, including OS 10.3.9 and DVR-K05 v1.03. I used Patchburn 3 and now it can burn CD-R and DVD-R disks using Disk Utility and iTunes. Sooooo . . . eh?

dan k

edit: old iTunes though, v4.6

Offline
Last seen: 1 year 11 months ago
Joined: Sep 23 2005 - 13:29
Posts: 316
huh..

you know, I actually hadnt thought about this, but there is the possibility that your drive is actually physically defective as well.

Offline
Last seen: 18 years 1 month ago
Joined: Oct 21 2006 - 01:01
Posts: 8
Re: huh..

you know, I actually hadnt thought about this, but there is the possibility that your drive is actually physically defective as well.

So I decided to run a little experiment with what you just said. I took a software that needs installing, ie it mounted a virtual disk on my desktop. Then I went to Disk Utility and there it showed the mounted disk. I told it to burn on my dvd. And what do you know, it successfully burned it on a dvd. Mind you at 1X speed, but hey, I'll take it at this point. This proves that it works.
I have been trying to burn with a program called Yuburn. I'll try iTunes and let you know what happens

Offline
Last seen: 1 year 11 months ago
Joined: Sep 23 2005 - 13:29
Posts: 316
also..

also check with TOAST im pretty sure it will be fully supported there

i didnt know anything about youburner, so i tried to research it and all i found was old version tracker and the authors japanese and english site, with almost no information... so when i tried to look at the authors "forums" for info i found that they were FLOODED to the top with "blog spam" and bot entries....

Im not convinced that Youburner EVER worked. Biggrin (maybe for some... but ive never heard of it, and i've been using GNU and GPL software for quite some time.

Offline
Last seen: 18 years 1 month ago
Joined: Oct 21 2006 - 01:01
Posts: 8
GNU GPL

I haven't heard of GNU and GPL. I'll check them out.
What I was trying to do is "backup" my dvd movie. so I ripped it and wanted to make a copy of it. 2 problems.
1. for some reason, iTunes won't play it, so i can't burn it using iTunes.
2. Even if I could burn it, the blank dvd I have holds only 4.7 gb and the movie is 7.4gb.
I have some research to do.
Bottom line is that I know now the dvd burner works and what I need to do.
I appreciate everyone's input and help

coius's picture
Offline
Last seen: 10 years 9 months ago
Joined: Aug 25 2004 - 13:56
Posts: 1975
GNU and GPL = licence types

they are not applications. I would say your machine has enough strength in it to drive tiger. I would suggest trying to find it on eBay. You might find a used copy for cheap.

Offline
Last seen: 18 years 1 month ago
Joined: Oct 21 2006 - 01:01
Posts: 8
what noticable benefit would

what noticable benefit would I get from it? All I do is watch dvd, surf the web, write papers, and listen to music.
I don't know how much 10.4 would help me. but i'll read it's features and make a decision then.

Offline
Last seen: 1 year 11 months ago
Joined: Sep 23 2005 - 13:29
Posts: 316
yup...

GNU and GPL are liscence types... for open source software, which Youburner appears to be. I thought you were into "free" software, and thats why you werent using a real burning app.

get tiger.

get toast

use mactheripper to rip your dvd and remove macrovision / region encoding

and burn the inages with toast

(or disk utility actually)

also, if you are less than scrupulous, then it is not required to buy anything to upgrade. its out there, and that is all i will say about that.

coius's picture
Offline
Last seen: 10 years 9 months ago
Joined: Aug 25 2004 - 13:56
Posts: 1975
Re: what noticable benefit would

what noticable benefit would I get from it?

It might make your burner work under all your apps. I know that a drive I had that was semi-supported under Panther, became fully functional in everything throughout the whole system after using 10.4 On top of that, the burn speed went from 1x to 16x! (which is what the drive does)

Offline
Last seen: 1 year 11 months ago
Joined: Sep 23 2005 - 13:29
Posts: 316
Re: hmmm...

I Found this quote on the MCE website... they sell upgraded mac laptop drives... (and other stuff)

"Seamless integration with iLife, Mac OS X
The MCE 8X Internal SuperDrive Upgrade with Dual/Double Layer support is compatible with all versions of Mac OS X, including Tiger, and is seamlessly compatible with Apple's iApps including iTunes, iDVD, and iPhoto. In fact, with the latest Mac OS 10.4.3 update, Apple has certified and built support specifically for our drive directly into the operating system. This is your guarantee that this drive will work with EVERY Apple and third-party disc recording application that runs on your Mac."

[their drive is just a pioneer]

funny how they said that after 10.4.3 apple built "support for their drive" right into the OS..

thats because apple built in support for 3rd party drive after 10.4.3

Also, here is Apples "Mac OS X Tiger feature comparison chart", comparing it out against panther and jaguar... the chart has alot of fluff in it though, there are more fundemental differences between these OS's that the user just doesnt see.

http://www.apple.com/macosx/upgrade/compare.html

maybe try 10.4... now that its come around again... this sure does sound familiar... where had I heard this advice before... Biggrin Biggrin

I may have missed it, but what version of X are you running?
If it is 10.4.3 or higher, it should support this drive just fine...
and, it is showing up as firmware version 1.03, which as near as I can tell is the latest firmware for this drive....

very interesting.

EDIT: you said patchburn 3... if you are running 10.4, you should be using patchburn 4.

also, I think (not 100% sure though) that you may need to update to 10.4 and use patchburn 4 if you are only running 10.3 now.

oh yeah, in the first reply. Smile

LOL... just being a jerk, I know... i do that sometimes. my apologies. Smile

Offline
Last seen: 18 years 1 month ago
Joined: Oct 21 2006 - 01:01
Posts: 8
this site

can i tell you I love this site. I'm glad I came across it and decided to post. you guys kick ass

Offline
Last seen: 17 years 3 months ago
Joined: Sep 10 2007 - 06:28
Posts: 4
installing pioneer dvd-rw dvd-ko5

I'm having the same problem you had except that I do have tiger, 10.4.10. I tried installing Patchburn 4 and it could not recognize the image as a recorder either. So I am not sure where to go from here.
I have a G3 Powerbook Pismo which this recorder is supposed to work with.
Thanks for any help you can give me...

Offline
Last seen: 1 year 5 months ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Uninstall Patchburn

I think that you need to uninstall Patchburn, as OS 10.4 has support for this drive, and Patchburn will interfere with that.

Mutant_Pie

Offline
Last seen: 1 year 5 months ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Uninstall Patchburn

I think that you need to uninstall Patchburn, as OS 10.4 has support for this drive, and Patchburn will interfere with that.

Mutant_Pie

Offline
Last seen: 17 years 3 months ago
Joined: Sep 10 2007 - 06:28
Posts: 4
Installing PIONEER DVD-RW DVR-K05 in PBTi

It was giving me the same problem before I installed patchburn, although I agree with what you are saying. I will uninstall it. The dvd recorder is actually a panasonic recorder but the computer reads it as the above.
Thanks

smessana

Offline
Last seen: 1 year 5 months ago
Joined: Dec 19 2003 - 18:53
Posts: 906
Feedback please

Let us know what happens with the Panasonic drive. Goodluck.

Mutant_Pie

Offline
Last seen: 17 years 3 months ago
Joined: Sep 10 2007 - 06:28
Posts: 4
PIONEER DVD-RW DVR-K05:

PIONEER DVD-RW DVR-K05:

Firmware Revision: 1.03
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
OK! We're getting somewhere. The computer reads it as a recorder now:

Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:
Media Type: DVD+RW
Blank: Yes
Erasable: Yes
Overwritable: Yes
Appendable: Yes

But the disc burning application that I am trying, BURN 1.71u, is not reading it as a recorder. There is also now a burn folder on the desktop.

Thanks

Have any suggestions what I should do now?

Offline
Last seen: 17 years 3 months ago
Joined: Sep 10 2007 - 06:28
Posts: 4
PIONEER DVD-RW DVR-K05

I have now downloaded another burn program, Simply Burns, and it appears to be working fine. Not sure what the problem was with the other.
Thanks for all your help.
smessana

Offline
Last seen: 16 years 9 months ago
Joined: Mar 5 2008 - 03:30
Posts: 1
Let me know what burner you i

Let me know what burner you installed as I am having the same problem

Log in or register to post comments