I need pinout conversion for Gazelle 6500 connector to CC analog connector.

7 posts / 0 new
Last post
Offline
Last seen: 6 years 9 months ago
Joined: Dec 20 2003 - 10:38
Posts: 25
I need pinout conversion for Gazelle 6500 connector to CC analog connector.

All I could find was the diagram for the 630 connector, but I need one for the 6500. Anyone have a link? Trying to get my first Tacky going here.

Thanks

Doug

Offline
Last seen: 6 years 9 months ago
Joined: Dec 20 2003 - 10:38
Posts: 25
Oh, wait. Or does the 6500 u

Oh, wait. Or does the 6500 use the 630 connector?

The 6500 connector goes in upsidedown, compared to the color classic. Do I just have to twist the cables around then?

Sorry, I'm very new to this.

Offline
Last seen: 7 years 3 weeks ago
Joined: Dec 19 2003 - 17:40
Posts: 566
Re: Oh, wait. Or does the 6500 u

Oh, wait. Or does the 6500 use the 630 connector?

got it in one Wink

TOM

Offline
Last seen: 6 years 9 months ago
Joined: Dec 20 2003 - 10:38
Posts: 25
So I just run the pinouts exa

So I just run the pinouts exactly? Because it's going to go in upsidedown compared to the color classic's board connector. I don't want to run power through the wrong wires and fry something. :/

Offline
Last seen: 4 hours 48 min ago
Joined: Dec 20 2003 - 10:38
Posts: 570
pinouts are a bit differen

No, the pinouts are a bit different. This site has the wiring diagram you need
http://member.nifty.ne.jp/frogeye/connector.html

Wayne

Offline
Last seen: 6 years 9 months ago
Joined: Dec 20 2003 - 10:38
Posts: 25
That was the diagram I was re

That was the diagram I was referring to. The tab in the middle (next to the "F1" text in the picture) for my 6500 connector is on the opposite side, which means the connector and 6500 motherboard are loaded into the CC chasis upsidedown, relative to the original CC motherboard's position. If I wire the pinouts exactly like in that diagram, they'll be on opposite sides (e.g. Pins S1-S50 and F1-F50 would be on the left side, and pins A1-A50 and C1-C50 would be on the right side.)

Do I just flip the wires? Or does it matter which side the cables are connected?

Offline
Last seen: 6 years 9 months ago
Joined: Dec 20 2003 - 10:38
Posts: 25
Oh my god, I'm a f*cking dumb

Oh my god, I'm a f*cking dumbass. Nevermind.

Log in or register to post comments