Time for new brakes again

11 posts / 0 new
Last post
Offline
Last seen: 5 years 11 months ago
Joined: Dec 20 2003 - 10:38
Posts: 851
Time for new brakes again
My old rotors were getting a little thin and pretty grooved, so I decided it was time for a new set. This time I went with the StopTech Stage 2 kit which comes with all four rotors, pads, steel brake lines, and fluid. Replacing the brake lines is suggested for my car at 100K (I have 96k) and I found several cracks in my old brake lines so this was a good time for it. Speaking of cracks, I remember the last time I did this, people came out of the woodwork to tell me about how my drilled rotors would crack and fracture and were totally unsafe. I'd just like to say that I carefully inspected all four of my old rotors and I couldn't find a single crack in any one of them. I'd also like to add that StopTech not only offered an excellent one stop shop, but the kit works extremely well. Also they have copious documentation about what U should expect from their kit and when. So far, the brake kit has performed *exactly* as they said it would right down to which hard stop would get fade during pad break in. Here's some pictures of my install efforts:
macg4's picture
Offline
Last seen: 11 years 11 months ago
Joined: Jan 17 2005 - 23:33
Posts: 311
im doing the same thing tonig

im doing the same thing tonight

iantm's picture
Offline
Last seen: 3 years 2 weeks ago
Joined: Apr 2 2005 - 14:01
Posts: 709
Went through that last week ...

Brakes are always fun. At least disc brakes are pretty straightforward to do. Drums ... not so much. (why ford thought drum brakes on the back of my focus was a good idea - I'll never know).

Jon
Jon's picture
Offline
Last seen: 12 years 10 months ago
Joined: Dec 20 2003 - 10:38
Posts: 2804
I did the rear drums in our '

I did the rear drums in our '03 Taurus many months ago, and the front discs not too long ago. It wasn't too bad, as I had already done the drums in my (now wrecked) Escort just about a year before. One thing about drums is that there is generally a specific order of assembly. I think I did it out of the "official" order, and I was able to do it without special tools both times. On the Escort I also changed the e-brake cables at the same time, so it was a bit more involved.

I may also not be too afraid of drums as I took Power Mechanics in HS. Part of the course was to tear down and rebuild simple manual transmissions and various drum brake systems. I don't think I'd tackle a tranny without a good manual, but drums are fairly logical and if you only do one side at a time, you'll have the opposite side as a reference in case something is forgotten or doesn't seem to go back on right.

Offline
Last seen: 10 years 6 months ago
Joined: Sep 16 2004 - 02:44
Posts: 274
Sounds good, stoptech makes r

Sounds good, stoptech makes really nice kits. Going to be doing pads and possibly new disks too soon, going with hawk HPS pads.

Offline
Last seen: 16 years 10 months ago
Joined: Oct 17 2006 - 04:13
Posts: 84
Ford Rear Drum Brakes ...

Why drum breaks in the rear?

$$$$$$$$$$$$$$$$$$$

At least that appears to be the logical answer.

David

Offline
Last seen: 15 years 10 months ago
Joined: Oct 28 2006 - 01:26
Posts: 51
Reason for drum brakes

Well the reason for Drum brakes on the rear of your focus are usually because of two things one is Cost.integrated rear calipers are a lot more than a pair of drum brakes

But the other one may be the fact that rear brakes aren't really used as much as the front brakes.You'll go through three sets of front brakes before you need rear shoes.
This is my opinion
heres my Certs if interested
ASE Certified
5 Areas Including Brakes
Toyota Certified Technician

iamdigitalman's picture
Offline
Last seen: 1 year 8 months ago
Joined: Mar 1 2004 - 22:18
Posts: 629
same here on my saturn. I hav

same here on my saturn. I have discs in the front, drums in the back. those are going to be fun to replace. when i first started driving it, I thought I needeed new ones because the old ones were making alot of noise, and did not seem to be efective. turns out, my fluid was low. filled it up, and no more noise, and I just need a light tap on the pedal, not a throtle to the floor as before.

I'll have even more fun when the O2 sensor dies. that thing is a PITA to replace.

-digital Wink

eeun's picture
Offline
Last seen: 1 year 22 hours ago
Joined: Dec 19 2003 - 17:34
Posts: 1895
What amazes me, after living

What amazes me, after living my life in the land of winter road salt, is seeing the underside of a car with ~100K that has so remarkably little rust on it.

Offline
Last seen: 5 years 11 months ago
Joined: Dec 20 2003 - 10:38
Posts: 851
Most car companies use drum b

Most car companies use drum brakes in the rear to save cost. This is done two ways. One, Calipers for disc brakes are really expensive. Usually they start around $1000 and get ridiculous in a hurry. The other cost savings is in antilock brakes. By putting a small drum in the back that provides only the needed 15% of braking force, they don't have to worry about the rear wheel locking up and trying to spin you out. Rear disc brakes require active anti lock systems which also significantly increase cost.

This being said, if you can get four wheel ABS disc, you should. The stopping power is vastly superior. Not to mention that modern ABS systems are extremely good. Also, they wear more evenly. The reason why rear drums last three times as long as the front discs is because they aren't exerting nearly enough force to contribute significantly to stopping the car as an antilock safety measure.

Offline
Last seen: 7 years 1 month ago
Joined: Feb 23 2005 - 05:27
Posts: 233
I'm spoiled.

My mechanic only charges me 20/hr and gets the parts cheaper than I'd pay for them in a store.

I've never had a situation like this, but I love it.

He replaced the back brakes for $60 labor.

I'm not even Family.

Log in or register to post comments