Has anyone replaced an iMac G4 Neck Assembly?

4 posts / 0 new
Last post
MaxTek's picture
Offline
Last seen: 1 month 2 weeks ago
Joined: Dec 20 2003 - 10:38
Posts: 703
Has anyone replaced an iMac G4 Neck Assembly?

Has anyone replaced an iMac G4 Neck Assembly? Were you successful any tips?

iantm's picture
Offline
Last seen: 10 months 3 weeks ago
Joined: Apr 2 2005 - 14:01
Posts: 709
I've done it ...

a handful of times, and wish never to do it ever again. Unfortunately, it's a case of read the Apple service manual, take your time, and pace yourself. This is not a job to rush through. Expect to spend one - two hours on the job. You will be stripping the machine down to its bare components to say the least. That said, it's easier on the 15" than the 17", and I had to go through therapy over the 20" that I did.

It's probably the most unpleasant repair of any Apple product I have ever seen. And yes, I am including complete teardown and rebuild of a 12" PowerBook G4 in that metric. It's been about three years since I've done one.

MaxTek's picture
Offline
Last seen: 1 month 2 weeks ago
Joined: Dec 20 2003 - 10:38
Posts: 703
Re: I've done it ...

iantm wrote:
a handful of times, and wish never to do it ever again. Unfortunately, it's a case of read the Apple service manual, take your time, and pace yourself. This is not a job to rush through. Expect to spend one - two hours on the job. You will be stripping the machine down to its bare components to say the least. That said, it's easier on the 15" than the 17", and I had to go through therapy over the 20" that I did.

It's probably the most unpleasant repair of any Apple product I have ever seen. And yes, I am including complete teardown and rebuild of a 12" PowerBook G4 in that metric. It's been about three years since I've done one.

I see what you mean. I have started it already. Guess I am too impatient. (I have the service manual). I have done the base part and have the LCD panel out of the frame and I think I will stop there until the new neck arrives in the mail.

I hope it goes back together as uneventful as taking it apart was.

Thanks.

iantm's picture
Offline
Last seen: 10 months 3 weeks ago
Joined: Apr 2 2005 - 14:01
Posts: 709
Anytime man

That's what we're all here for.

Log in or register to post comments