Need help with Powerbook 180c

9 posts / 0 new
Last post
MaxTek's picture
Offline
Last seen: 1 year 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 702
Need help with Powerbook 180c

Hi,

I've been trying to resurrect a Powerbook 180c. I got as far as the screen lighting up and than nothing. I can't even get the screen to light now.

I checked my power adapter with a voltmeter and it checks ok. I have taken apart the PB and the power plug appears fine on the motherboard. Nothing shows up when I inspected the daugtherboard and motherboard.

So my guess is either a bad motherboard or the CMOS battery. The CMOS battery on this model is a quarter size battery but is soldered to the motherboard and has a connector soldered to the battery...go figure.

I know other Macs won't start with a bad CMOS battery but what about this model Powerbook?

Anyone know or have any suggestions?

Thanks.

Offline
Last seen: 5 years 3 weeks ago
Joined: Jun 7 2007 - 20:27
Posts: 213
Did you test battery.

Did you ever test the battery? Make sure it works before taking it out. Does it make a startup bong? A little more information would be nice.

MaxTek's picture
Offline
Last seen: 1 year 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 702
Re: Did you test battery.

Did you ever test the battery? Make sure it works before taking it out. Does it make a startup bong? A little more information would be nice.

Test the battery? Do you mean the CMOS battery? If yes, than no I haven't tested the battery. It is soldered onto the motherboard. No startup bong, no hard drive noise.

When I just got the screen to light up I didn't get a startup bong either. It would hang at the lit up screen.

No it does nothing. No noise.

Offline
Last seen: 5 years 3 weeks ago
Joined: Jun 7 2007 - 20:27
Posts: 213
Try desoldering.

If you have a soldering iron. De-solder the batter and test it, if it's dead, replace it and see what happens then. Does the laptop's battery work? Not the CMOS, but the main battery? Something might be messed up on the motherboard, check around the web and see if you can find anything. I don't own a power book.

eeun's picture
Offline
Last seen: 1 year 1 day ago
Joined: Dec 19 2003 - 17:34
Posts: 1895
I've had similar probems with

I've had similar probems with the 180.

My problem ended up being the AC adapter, which was putting out the correct voltage, but not enough amps. The adapter was either from an earlier 'book, or from the battery charging block. Is the AC adapter known to be for that Powerbook?

The cmos battery should not influence startup on the older 'books. The pram batteries in my three older units (180, 140, 165c) have been dead since at least 2000, and all will start.

The main battery may have an effect, though. Have you tried starting with the battery in or out?

MaxTek's picture
Offline
Last seen: 1 year 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 702
Re: I've had similar probems with

I've had similar probems with the 180.

My problem ended up being the AC adapter, which was putting out the correct voltage, but not enough amps. The adapter was either from an earlier 'book, or from the battery charging block. Is the AC adapter known to be for that Powerbook?

The cmos battery should not influence startup on the older 'books. The pram batteries in my three older units (180, 140, 165c) have been dead since at least 2000, and all will start.

The main battery may have an effect, though. Have you tried starting with the battery in or out?

Yes the PB 180c needs a 24W adapter (model 5652) and that is what I am using. I have tried starting with the main battery in its tray and removed. No difference.

Starting to sound like a bad motherboard....?

Offline
Last seen: 14 years 9 months ago
Joined: Jan 13 2007 - 19:57
Posts: 208
STOP!!!!

Hey,

Before you start de-soldering stuff on the 'book, try resetting the power manager.

Read about it here:

http://www.westwind.com/reference/tn/PMReset.html

William
www.williamahearn.com

MaxTek's picture
Offline
Last seen: 1 year 5 months ago
Joined: Dec 20 2003 - 10:38
Posts: 702
Re: STOP!!!!

Hey,

Before you start de-soldering stuff on the 'book, try resetting the power manager.

Read about it here:

http://www.westwind.com/reference/tn/PMReset.html

William
www.williamahearn.com

Yes I did that but thanks for the link anyway.

grannysmith's picture
Offline
Last seen: 12 years 1 month ago
Joined: Dec 20 2003 - 10:38
Posts: 178
PB 100 series backup batteries

The advice about resetting the power manager was a good starting point, but it must be added that the much-misunderstood internal backup battery (not just a 'PRAM' battery) plays a part. I've written about its longevity and re-charge characteristics before, and it may be worth your while to take those into account. Otherwise, you have already followed most of the logical causes of misbehaviour.

What cannot be excluded is that some prior owner has faffed about with the innards of the PB, replacing the inverter with one of the wrong output voltage, or installed the wrong daughtercard (containing the 33MHz CPU and 68882 FPU). You can rule out these only by comparing the assembly numbers to Apple's specification in the Service Source manual Vol. III. To save you some time, they are 922-0378 (922-0374 is for the 165c) and 661-0751 respectively.

de

Log in or register to post comments