Airport to Bridge

3 posts / 0 new
Last post
Offline
Last seen: 19 years 2 months ago
Joined: Dec 20 2003 - 10:38
Posts: 20
Airport to Bridge

Hey folks was wondering if i could get a lil assistance, i got a dlink DI -604 router that i have connected to my airport cause i have 5 computers running here only one mac using the airport and i need to get access to the map from outside my house but cuase it changes the ip it gets from the router as a 192.168.0.100 to 10.0.1.2 from the airport is there a way i can get the d-link router's ip to come threw, basically bridge mode, if i switch the cable and plug it into the other side of the airport and the network pref's show the 192.168.0.100 ip addy coming from the dlink but im not able to route...and im forgettin a lil setting somewhere perhaps...any ideas folks ?

:macos:

Offline
Last seen: 19 years 2 months ago
Joined: Dec 20 2003 - 10:38
Posts: 20
solved

well after a long day of sittin at my desk i found the anwser..if anyone is intrested or for further information, open the airport admin utility and open the base station's configuration, click the network tab and uncheck the " distribute ip address "
and boom...perhaps a lil settings tweak might be needed but if anyone wants to know i'll update it for if asked

Offline
Last seen: 19 years 2 months ago
Joined: Dec 20 2003 - 10:38
Posts: 20
well after a long day of sitt

well after a long day of sittin at my desk i found the anwser..if anyone is intrested or for further information, open the airport admin utility and open the base station's configuration, click the network tab and uncheck the " distribute ip address "
and boom...perhaps a lil settings tweak might be needed but if anyone wants to know i'll update it for if asked

Log in or register to post comments