Anonymous
User login
Please support the defense of Ukraine.
Direct or via Unclutter App
Active forum topics
- Apple IIe emulator with a Monitor II CRT look, real Disk II sounds, CP/M and mouse support
- Microsoft SoftCard II - Claude created working emulation
- APPLE 50 – 50 years of Apple as an ASCII-art slideshow for the Apple-1 (inspired by David Schmenk's Apple30)
- Apple-1 display not working well: Is it because of my counterfeit AM1404s? Or something else?
- Hires vertical position calculations?
Recent content
Navigation
No Ads.
No Trackers.
No Social Media.
All Content Locally Hosted.
Built on Free Software.
We have complied with zero government requests for information.

Comments
I want
This has always been the Dana vHack I've most wanted to have as a real-life unit sitting in my study.
Ditto. Well, I did suggest it after all.
Is there any portrait or flat-panel monitor with the right dimensions to pull this off?
A bigger problem might be ext
A bigger problem might be extending the aperture vertically on the front panel. It would be pretty impossible to make it look as good as the picture. Getting that nice rounded edge going up the sides isn't possible to reproduce because the plastic just isn't there.
By my (very) crude calculations, a 10.4" monitor should work. I forget if rotating for portrait display is a function of the monitor, video card, or both.
Re: A bigger problem might be ext
You could just use the plastic from two fronts