Apple 3.5 drive isn't recognized on Platinum IIe

13 posts / 0 new
Last post
Offline
Last seen: 6 years 10 months ago
Joined: May 6 2015 - 09:11
Posts: 84
Apple 3.5 drive isn't recognized on Platinum IIe

I just got a Platinum IIe. I put my 5 1/4 I/O card in the IIe and both drives seem fine. I put my 3.5 Drive controller card (603-9107-A LIRON) in and attached my 3.5 drives (A9M0106) drives, first both daisy chained, then individually. At no time were any of the 3.5 drives accessed. I have the 3.5 card in slot 5 and the 5 1/4 card in slot 6.

Yesterday or the day before, the 4 drives were daisy chained to a IIgs and worked.

Does anyone have any pointers in troubleshooting this?

Thanks.

transwarp II guy's picture
Offline
Last seen: 4 years 10 months ago
Joined: Mar 7 2013 - 08:55
Posts: 474
Re: Apple 3.5 drive isn't recognized on Platinum IIe

I believe the A9M0106 drives you have are regular 3.5 drives designed for the Apple IIgs. A Liron card requires the use of a Unidisk 3.5 drive.

I suggest not plugging it in again, as the card can damage easily.

Offline
Last seen: 6 years 10 months ago
Joined: May 6 2015 - 09:11
Posts: 84
Re: Apple 3.5 drive isn't recognized on Platinum IIe

Thanks.
I guess I'll have to check the drives in my GS the next day or two.

Any idea where I can get a card so I can use my 3.5 drives in my IIe?

transwarp II guy's picture
Offline
Last seen: 4 years 10 months ago
Joined: Mar 7 2013 - 08:55
Posts: 474
Re: Apple 3.5 drive isn't recognized on Platinum IIe

A Vtech Universal Disk Controller card (UDC) would allow the style drives you have to work with an Apple IIe. They come up on ebay every now and then.

Offline
Last seen: 6 years 10 months ago
Joined: May 6 2015 - 09:11
Posts: 84
Re: Apple 3.5 drive isn't recognized on Platinum IIe

Maybe I should be looking for a UniDisk, too?

jwg1962's picture
Offline
Last seen: 18 hours 30 min ago
Joined: Jan 29 2012 - 07:17
Posts: 363
Re: Apple 3.5 drive isn't recognized on Platinum IIe

Either, but both of these usually come at a premium price unfortunately

Jay

amauget's picture
Offline
Last seen: 1 week 4 days ago
Joined: Jan 3 2011 - 11:34
Posts: 339
Re: Apple 3.5 drive isn't recognized on Platinum IIe

For the record, this excellent article explains which drives to use with which Apple II.

Offline
Last seen: 6 years 10 months ago
Joined: May 6 2015 - 09:11
Posts: 84
Re: Apple 3.5 drive isn't recognized on Platinum IIe

Thanks. I saved that with my other references.

Offline
Last seen: 6 years 10 months ago
Joined: May 6 2015 - 09:11
Posts: 84
Re: Apple 3.5 drive isn't recognized on Platinum IIe

I just bought a VTECH UDC card. I also found a readable manual online. It doesn't say if I can use both the UDC and an Apple I/O Card (for 5 1/4 drives). The manual says that although the UDC card is designed to handle 4 drive chains, it isn't recommended due to signal degradation and electrical noise.

I'd like to plug two 3 1/2 drives in the UDC (either daisy chained or one into J1 and the other into J2) and two 5 1/2 drives in the Apple card.

Is this possible? Could I boot from the 5 1/2 and still have access to the 3 1/2, and the reverse?

Offline
Last seen: 14 hours 11 min ago
Joined: Dec 20 2003 - 10:38
Posts: 570
Re: Apple 3.5 drive isn't recognized on Platinum IIe

You can have both 5.25” and 3.5” drives connected to the Vtech UDC card at the same time. I had one hooked up that way briefly but I never cared for that setup as it’s less convenient for booting programs from the second drive. I preferred having a 5.25” controller in slot 6 and the UDC with 3.5” drives in slot 5.

Offline
Last seen: 6 years 10 months ago
Joined: May 6 2015 - 09:11
Posts: 84
Re: Apple 3.5 drive isn't recognized on Platinum IIe

That is exactly how I was thinking of doing it.

transwarp II guy's picture
Offline
Last seen: 4 years 10 months ago
Joined: Mar 7 2013 - 08:55
Posts: 474
Re: Apple 3.5 drive isn't recognized on Platinum IIe

I preferred having a 5.25” controller in slot 6 and the UDC with 3.5” drives in slot 5.

Same here.

That is exactly how I was thinking of doing it.

It's for the best to run it in slot 5 with a 5.25 card in slot 6, as a lot of the UDC cards seem to develop issues with running 5.25 drives.

Here is more information:
http://www.applefritter.com/content/apple-udc-problem-universal-disk-controller

Offline
Last seen: 6 years 10 months ago
Joined: May 6 2015 - 09:11
Posts: 84
Re: Apple 3.5 drive isn't recognized on Platinum IIe

Thanks.

Log in or register to post comments