Hi everyone.
I was wondering if anyone could help me out with a schematic for a Dyna Comp 699-0136 IIe euro power supply.
Have found a couple of faulty components and eliminated the usual suspects but I can't afford to be poking around in there
much more as my time is rather limited at the moment. So a schematic would come in handy. Thanks.
Sorry that should have been IIe platinum.
Hi ozdude,
Sorry, no schematic but an easy fix here.
Perhaps it could help you.
Hello ozdude,
I´m not sure about the fact if it's same to Dyna Comp....
but there is a schematic of the supply of the IIe at my page at:
http://www.appleii-box.de/D04_allabotpowersupplies.htm
maybe it's of use to you....
sincerely
speedyG
Thanks Antony though this one isn't one of those easy fix repairs but one of those oddball fault jobs that you've already lost
money on if you were doing it as a paid repair job (which it isn't). I have got it to the stage where its no longer tripping
the RCD which was caused by a shorted MOV and I have replaced a couple of caps on it as a matter of course. Meanwhile I do have
a bench full of other stuff that does need to go out.
Thanks for that speedyG, those should give me something to go on.
In case of doubt check also the followup pages by using the links at the bottom of each page...
sincerely speedyG