Aztec AA11040c PSU

6 posts / 0 new
Last post
Offline
Last seen: 2 days 16 hours ago
Joined: Sep 9 2019 - 04:20
Posts: 3
Aztec AA11040c PSU

I have an Aztec AA11040C power supply in my Apple II+ which is not working. Measuring voltages show the -12v and -5v both OK but no +12V and +5V. Before I jump and do a full recap, I'd like to know if this needs any other component replacement. Anyone had similar experience, please share them. 

Offline
Last seen: 2 days 9 min ago
Joined: Aug 4 2018 - 21:59
Posts: 123
If the supply is putting out

If the supply is putting out -12 and -5 then it has to be putting out the other voltages.

Where are you measuring the voltages?

Offline
Last seen: 2 days 16 hours ago
Joined: Sep 9 2019 - 04:20
Posts: 3
From the plug but I wasn't

From the plug but I wasn't making contact. It's all good now and all voltages correct. Now I will have to find out why the computer doesn't boot. Visually checked the motherboard and all good.

Offline
Last seen: 2 days 9 min ago
Joined: Aug 4 2018 - 21:59
Posts: 123
Do you get anything on the

Do you get anything on the screen?

Offline
Last seen: 2 days 16 hours ago
Joined: Sep 9 2019 - 04:20
Posts: 3
No, nothing. No power light

No, nothing. No power light either.

Offline
Last seen: 2 days 9 min ago
Joined: Aug 4 2018 - 21:59
Posts: 123
The contacts inside the dc

The contacts inside the dc plug of the power supply have probably spread.  If you are reading some votlages and not others at ther motherboard.

Log in or register to post comments