CC doesn't boor with lb, but without is starts (fan) - PLEASE help

5 posts / 0 new
Last post
Offline
Last seen: 3 years 1 month ago
Joined: Jan 30 2021 - 10:31
Posts: 3
CC doesn't boor with lb, but without is starts (fan) - PLEASE help

Hi Guys,

 

I know there are loads of topics. But i still dont know what to do.

 

-So the CC wont booth with my keybaord.

-Replaced the PRAM battery with new one.

-CC 'boots' without the Logic board. Harddrives spins (sound), no green light, no screen working.

-Logic board in, without Pram battery doesnt boot either.

-Didi the power in for a day, with switch on, nothing...

 

The logic board looks really good condition. No corrosion or anything.

Just a little bit dusty.

 

 

Do i need to clean the bord? I see board in water??? Sounds insane, but will that help.

 

Thank you!

 

 

 

Dr. Webster's picture
Offline
Last seen: 18 hours 44 min ago
Joined: Dec 19 2003 - 17:34
Posts: 1747
So, when you flip the power

So, when you flip the power switch on the back of your Color Classic, the hard drive spins up even though there's no motherboard installed? That's not normal at all, and suggests you have a problem with the analog board. The drive and rear fan shouldn't start until the keyboard power button is pressed (with a working motherboard installed, obviously).

Tom Owad's picture
Online
Last seen: 5 min 6 sec ago
Joined: Dec 16 2003 - 15:14
Posts: 3349
If you need to clean the

If you need to clean the board, use isopropyl alcohol, not water.

Offline
Last seen: 3 years 1 month ago
Joined: Jan 30 2021 - 10:31
Posts: 3
Dr. Webster wrote:So, when
Dr. Webster wrote:

So, when you flip the power switch on the back of your Color Classic, the hard drive spins up even though there's no motherboard installed? That's not normal at all, and suggests you have a problem with the analog board. The drive and rear fan shouldn't start until the keyboard power button is pressed (with a working motherboard installed, obviously).

 

Yes, the fan strats, the hd does a spin... and thats it, when pushing in the logic board, it shuts down, or other times it stays on and nothing happends, and one time i heared the pram eroor, but screen stays blank.

 

 

Offline
Last seen: 3 years 1 month ago
Joined: Jan 30 2021 - 10:31
Posts: 3
Tom Owad wrote:If you need to
Tom Owad wrote:

If you need to clean the board, use isopropyl alcohol, not water.

okay got it. So water is not an option at all (seeing a lot of tutorials online) but i have alcohol in the house so will try that....

Log in or register to post comments