Apple //e boot up screen

16 posts / 0 new
Last post
GeekDad's picture
Offline
Last seen: 1 year 3 months ago
Joined: May 5 2022 - 13:04
Posts: 8
Apple //e boot up screen

All,

       This is kind of a silly question but it has been bothering me. 

       I have two apple //e 's   (badged and verified the motherboards), but one boots up with  the expected banner     Apple //e but then the other one boots with    Apple ][

    Both work like IIe's lower case, applesoft in from, etc.

      Anybody able to tell me what is causing the difference?  

 

 

 

 

MacFly's picture
Offline
Last seen: 4 days 17 hours ago
Joined: Nov 7 2019 - 13:49
Posts: 442
The ROM is the difference

The ROM is the difference. The original ROM displayed "Apple ][". The ROM that came with the "enhanced" machines displays "Apple //e". The "enhanced" machines also came with a 65C02 (instead of 6502) and also replaced the video ROM.

Offline
Last seen: 2 months 3 days ago
Joined: Apr 23 2022 - 18:41
Posts: 91
MacFly summed it all up. Also

MacFly summed it all up. Also if you do a system self test the enhanced system (the one that says iie) it will say “system ok”, the unenhanced system (the one that says Apple ii) will say “Kernel ok”. If you do decide to enhance it hold on to your unemhanced chips. 

GeekDad's picture
Offline
Last seen: 1 year 3 months ago
Joined: May 5 2022 - 13:04
Posts: 8
Thanks

Oh wow never realized.  The //e that says  Apple ][ was mine from Jr. High school.  Not sure where the second came from.

Offline
Last seen: 10 hours 53 min ago
Joined: Jul 5 2018 - 09:44
Posts: 2516
Or look into some of the

Or look into some of the newer ROM replacement products that will allow switching back and forth between the ROMs.  Of course that still won't switch back from 65C02 to 6502, but it may allow a few programs to run that fail on an Enhanced //e if it is only ROM compatibility issues.

 

Offline
Last seen: 2 days 20 hours ago
Joined: Apr 26 2016 - 08:36
Posts: 661
softwarejanitor wrote:Or look
softwarejanitor wrote:

Or look into some of the newer ROM replacement products that will allow switching back and forth between the ROMs.  Of course that still won't switch back from 65C02 to 6502, but it may allow a few programs to run that fail on an Enhanced //e if it is only ROM compatibility issues.

 

There is almost zero programs that will REQUIRE the presence of the 6502 instead of the 65C02.

In the old days it was popular for a time to replace the 6502 with a 65C02 in an un-enhanced IIe to allow you to run software that required the extra CPU opcodes in the 65C02 while keeping the character set of the un-enhanced IIe.

 

Don't throw away that 6502.  There are a lot of II+ owners that may covet it when eBay supplies dry up or Chinese fakes start to dominate those chip sales as well.

 

Offline
Last seen: 4 hours 26 min ago
Joined: Jun 29 2018 - 16:55
Posts: 570
Echoing what baldrick said.

Echoing what baldrick said.

 

To be honest, despite it coming with a normal 6502, I use a 65C02 on my Apple 1 clone on purpose, not necessarily because I'll ever use the features, but because I always read that it is uses 10 times less power than the normal 6502. When mA are at a premium, it's a no brainer to me. 

Offline
Last seen: 2 days 20 hours ago
Joined: Apr 26 2016 - 08:36
Posts: 661
skate323k137 wrote:Echoing
skate323k137 wrote:

Echoing what baldrick said.

 

To be honest, despite it coming with a normal 6502, I use a 65C02 on my Apple 1 clone on purpose, not necessarily because I'll ever use the features, but because I always read that it is uses 10 times less power than the normal 6502. When mA are at a premium, it's a no brainer to me. 

 

I suppose you could write some cheeky code to use those extra CPU functions on your Apple I, save the program to tape and confound your Apple I friends!

Offline
Last seen: 1 day 14 hours ago
Joined: Aug 18 2017 - 16:53
Posts: 164
skate323k137 wrote: but
skate323k137 wrote:
 
but because I always read that it is uses 10 times less power than the normal 6502. When mA are at a premium, it's a no brainer to me. 

 

The early MOS 6502 has a power supply current of typ. 70mA, max. 160mA. This is "official" data from the datasheet.

 

Later 6502 from Rockwell, Ricoh, GTE, Synertek, UMC etc. need less power. Estimated 30...50mA.

 

The typical CMOS 65C02 is specified at 2mA per 1MHz.

 

Offline
Last seen: 2 months 3 days ago
Joined: Apr 23 2022 - 18:41
Posts: 91
There is one program I found

There is one program I found that doesn’t support the enhancement chips. VisiCalc iie. Runs but the character sets are wacky.  There is however an image of “Advanced VisiCalc” on 3.5” that DOES support the enhancement . I guess if your a die hard VisiCalc user. But yes I would agree there is software out there that requires the enhancement. If you’ve got 2 working systems just have one of each. I have 2 enhanced iies and 1 1982 revB unenhanced. 

GeekDad's picture
Offline
Last seen: 1 year 3 months ago
Joined: May 5 2022 - 13:04
Posts: 8
6503?

Just looked at the mother board and this apple has a Rockwell 338-6503 processor in it.

Never heard of the 6503....

Offline
Last seen: 6 hours 4 min ago
Joined: Dec 20 2003 - 10:38
Posts: 569
David Katz wrote:Just looked
David Katz wrote:

Just looked at the mother board and this apple has a Rockwell 338-6503 processor in it.

Never heard of the 6503....

Apple name for a Rockwell 65C02

 

Offline
Last seen: 2 months 3 days ago
Joined: Apr 23 2022 - 18:41
Posts: 91
I have a 6503 in one of my

I have a 6503 in one of my enhanced iies. Scratched my head when I saw it at at first. Just a 65c02. 

Offline
Last seen: 4 hours 48 min ago
Joined: Jun 18 2010 - 13:54
Posts: 731
 mochatea396 wrote:If you’ve

 

mochatea396 wrote:

If you’ve got 2 working systems just have one of each. I have 2 enhanced iies and 1 1982 revB unenhanced.

Or get the ROMXe so you can instantly switch between enhanced and un-enhanced. And also get extra fonts, Reat Time Clock, and instant booting into DOS, ProDOS, or other applications. It will also eliminate the false boot issue that sometimes occurs if you power cycle the computer too quickly.

Offline
Last seen: 16 hours 51 min ago
Joined: Dec 19 2008 - 21:01
Posts: 392
There's really no programs

There's really no programs that used the undocumented opcodes in the 6502 that breaks with 65c02?

 

Offline
Last seen: 10 hours 53 min ago
Joined: Jul 5 2018 - 09:44
Posts: 2516
There are at least a few

There are at least a few games that won't run on a 65C02, but that's not very common.  I used to know a couple examples but my memory has faded.  And a couple of them it was only the original copy protection -- cracked copies would run.

 

 

Log in or register to post comments