Apple IIe DynaComp 606-5001 PSU 120V to 230V?

3 posts / 0 new
Last post
body_Infinity's picture
Offline
Last seen: 6 hours 27 min ago
Joined: Oct 2 2019 - 08:51
Posts: 12
Apple IIe DynaComp 606-5001 PSU 120V to 230V?

Hi guys, has anyone been able to convert the earlier DynaComp  606-5001 PSU to 230 volt? Ive converted the later models successfully few years ago but have a couple of these sitting in my parts box waiting for some love. Have opened one up and all the caps / switches etc are rated at 250volt on the input side but have not been able to locate a schematic on this model to investigate further.

Any help/tips appreciated.

Offline
Last seen: 6 hours 32 min ago
Joined: Aug 10 2006 - 22:21
Posts: 104
Schematics here : http://www

Schematics here for later model - I'm not sure how much different the earlier one is?

body_Infinity's picture
Offline
Last seen: 6 hours 27 min ago
Joined: Oct 2 2019 - 08:51
Posts: 12
Thanks Dean thats the later

Thanks Dean thats the later version, the PSU I have is an early model the board has 820-0040-A on the back made in Singapore, unlike the Astec there are no other markings on the board. Will try take some photos for refrence. Thanks again.

Log in or register to post comments