Bought a Rev 7 Board

7 posts / 0 new
Last post
Offline
Last seen: 4 months 2 days ago
Joined: Nov 24 2013 - 13:23
Bought a Rev 7 Board

Found this on ebay not getting any attention, so I put in a bid on it. I think the seller made a mistake with the listing because it wasn't showing up in the usual search for Apple II motherboards.

http://www.ebay.com/itm/VTG-1979-APPLE-MOTHERBOARD-LOGIC-BOARD-EARLY-SERIAL-NUMBER-820-0001-07-JOBS-MAC-/261439486782?_trksid=p2047675.l2557&ssPageName=STRK%3AMEWNX%3AIT&nma=true&si=piBf3RZzZTMIAh79Gf9AmNYwjtA%253D&orig_cvip=true&rt=nc

Don't know what the story is with all the desoldered (or never installed?) sockets. Anyone know where I can get correct replacement sockets?

I'm sure this thing is how it is for a reason, but I only wanted an example of a Rev 07(the long, long term goal is get a representative of each 820-0001-xx part number (I'll skip on the all variations within, unless I stumble on it like I did with the black slot Rev 04).

Interestingly the date code on it is 20-something weeks later than my Rev 04.. is that all the time it took to go through 3 more revisions?

MarkO's picture
Offline
Last seen: 1 week 6 days ago
Joined: Dec 10 2011 - 16:26
Re: Bought a Rev 7 Board

Fascinating....

I wonder if this was an Early Production Run Rev-07 board...

I see some Solder in some of the Holes in the D0 and D8 ROMs positions..

MarkO

chaosdesigns's picture
Offline
Last seen: 11 months 2 weeks ago
Joined: Apr 6 2014 - 00:22
Re: Bought a Rev 7 Board

Indeed, It definitely looks like it has a story.....

Offline
Last seen: 4 months 2 days ago
Joined: Nov 24 2013 - 13:23
Re: Bought a Rev 7 Board

Yeah I agree the story on this one must be interesting. I mean, straightforward parts scavenging -- why go for the sockets? I was thinking maybe somebody trying to do up an Apple I replica (even though these wouldn't be correct), but then why remove the game port? If scavenging for a ravaged Apple II board, why remove them in a linear fashion like that instead of just the random ones you need? The pattern is what makes it interesting.

Offline
Last seen: 2 hours 26 min ago
Joined: Oct 9 2011 - 12:54
Re: Bought a Rev 7 Board

I think someone was troubleshooting a signal short on the board, or it was partially under water or something that caused a section of sockets to corrode and they started removing and never finished. Notice the rework wiring on the back as well...

chaosdesigns's picture
Offline
Last seen: 11 months 2 weeks ago
Joined: Apr 6 2014 - 00:22
Re: Bought a Rev 7 Board

Maybe someone was practicing their desoldering skills.

Offline
Last seen: 11 hours 11 min ago
Joined: Dec 20 2003 - 10:38
Re: Bought a Rev 7 Board

Looks like someone was recycling some sockets. They started at one end and stopped when they had enough for the next few projects. I've known a few people that would have done that. Sometimes they'd pull parts until they got tired or something came up.

Log in or register to post comments