I recently acquired a Dove MacSnap card, which allows a SCSI port to be added to a Mac 128k. This board plugs into both ROM slots and provides a port for the SCSI cable. However, one of the pins that connects to the ROMs is missing, as well as two that connect to the SCSI-out cable. Does anyone know how I could repair something this delicate?
I can post pictures if that helps.
Post a picture please.
As requested, here's some pictures:
One pin for the ribbon cable is supposed to be missing. That's to key the ribbon cable so you can't plug it in backwards. But I see you have 2 pins missing, so that additional pin may be a problem.
It looks like the broken pin is important. The missing pin is most likely ground but the broken pin could be I/O or Data 0