SE/30 1.2GB Quantum Drive and the Activity LED

2 posts / 0 new
Last post
Offline
Last seen: 4 years 2 months ago
Joined: Mar 6 2014 - 13:18
SE/30 1.2GB Quantum Drive and the Activity LED

Greetings,

I have an SE/30 with a 1.2GB Quantum SCSI drive. In fact its a Quantum Fireball fbtms 655-0394. I'd like to get the activity LED to work but the cable connector does not match whats on the drive. I've searched the internet but haven't found anything. The drive has a 5 pin connector that is flat and VERY thin. Its about 1/2 inch wide and about 1/16 of inch (maybe less) high. Does anyone know what the pinout is and/or if there is a cable available anywhere?

A second thought, is there a way to the activity via the 50 pin SCSI? Thanks!!!

-Pete

spicybeef's picture
Offline
Last seen: 1 year 9 months ago
Joined: Mar 13 2014 - 16:01
Re: SE/30 1.2GB Quantum Drive and the Activity LED

Unfortunately there's no easy way of getting LED activity out of a SCSI connection without some intermediate circuitry. Normally hard drive activity must be provided by either the hard drive itself or a logic board. Could you perhaps post a picture of the connector or any other connector so that we may inspect it closer?

Log in or register to post comments