Super Serial Card Layout

4 posts / 0 new
Last post
Offline
Last seen: 1 week 13 hours ago
Joined: Jun 12 2022 - 23:35
Posts: 85
Super Serial Card Layout

For those that are interested, I revised Joshua Thompson's Super Serial Card build.  I revised it to be 2 layer rather than 4 layer, and to use a 1.8432 MHz crystal and Pierce oscillator rather than a self-contained oscillator.

The project is a fork of the original project at:

 

http://www.github.com/profdc9/ssc

 

and the original is at

 

https://github.com/jmthompson/ssc

 

 

 

 

skleung's picture
Offline
Last seen: 3 days 34 min ago
Joined: May 10 2022 - 00:11
Posts: 2
Super Serial Card Layout

good job!!! thank you.

Offline
Last seen: 9 hours 14 min ago
Joined: Dec 19 2008 - 21:01
Posts: 372
Here is a simpler 2-layer

Here is a simpler 2-layer board version...

 

https://github.com/dlxmax/ssc-2-layer

Offline
Last seen: 1 week 13 hours ago
Joined: Jun 12 2022 - 23:35
Posts: 85
I don't think this is done

I don't think this is done right, I opened it and there are four layers there.  I deleted the inner two layers that shouldn't have been there and it did not pass design rule check.

 

 

Log in or register to post comments