Powerbook 12inch Aluminum Battery not showing up. I had taken apart my powerbook to remove a dvd stuck in the drive. DVD is out and put the book back together. Everything was working fine but the laptop will not display the battery time but it runs off it just fine. So I did the PMU reset then it will not boot from the battery. Went and took it apart again and the battery worked fine. The time remaining on the battery was their but the battery wouldn't charge. Ok 3 and final take a part, same thing but now I notice the pins on the bottom of the dc-dc board are slightly bent. I must have bent them just a little to one side when taking the board out the first time.
Dose anyone have any suggestions?