StyleWriter 2500/seeking help

4 posts / 0 new
Last post
Offline
Last seen: 13 years 6 months ago
Joined: Oct 17 2004 - 11:46
StyleWriter 2500/seeking help

I hope that I've come to the right forum to post this question ...

I'm looking for some help with my StyleWriter 2500.

I haven't used it for a while. Put new ink tanks in but still can't get a print out from the printer. Paper feeds fine. If I take out the ink tanks the little ink pads on them are not dry.

I don't know where the actual print head is ... I think that the head must be gummed up and just needs to be cleaned/nozzles need to be cleared.

1. Where is the head located? Is it on the box cartridge that the two ink tanks sit inside? or is it on the slider mount that the box cartridge slides into?
2. What's the best way to clean the head? I've heard that a cotton bud is not good, but a spritz of water is good ... also that a drop of Windex ought to do the job.

If there's anyone out there who knows and/or has actually done this, please let me know. I've checked the Apple manuals for this printer and they don't shed any light on my question.

Thanks

Dr. Webster's picture
Offline
Last seen: 5 hours 15 min ago
Joined: Dec 19 2003 - 17:34
Submitting the same post eigh

Submitting the same post eight times will only get the mods mad at you.

Offline
Last seen: 13 years 6 months ago
Joined: Oct 17 2004 - 11:46
Submitting same post

Hi

I'm appalled and embarrassed ... how on earth did I manage to submit it eight times???

Is there a way to cancel the mysterious multiplied posts??

Thanks for pointing this out ... I have NO idea how that happened.

Dr. Webster's picture
Offline
Last seen: 5 hours 15 min ago
Joined: Dec 19 2003 - 17:34
Re: Submitting same post

oldmachead wrote:
Is there a way to cancel the mysterious multiplied posts??

I already have. But just click the submit button once, OK?

Log in or register to post comments