Power Supply for Gigabit Ethernet G4 tower

7 posts / 0 new
Last post
Offline
Last seen: 13 years 4 weeks ago
Joined: Dec 28 2004 - 12:46
Power Supply for Gigabit Ethernet G4 tower

I am looking for a power supply for my G4 GigE Tower. This is the 338W 22-pin type (Apple part# is 661-2332 or 614-0112). The companies that I've found on the web that have them are selling them for a pretty steep price (close to $200) but I'm hoping someone here has one that they're willing to sell for much less.

Thanks!!

Jack :macos:

martakz's picture
Offline
Last seen: 7 years 1 month ago
Joined: Dec 20 2003 - 10:38
Can't an ATX be modded for th

Can't an ATX be modded for these models?

Offline
Last seen: 13 years 4 weeks ago
Joined: Dec 28 2004 - 12:46
Not that I know of...

Thanks for the suggestion, but I don't think a standard ATX power supply would work.
From xlr8yourmac.com, a standard PC ATX Power Supply doesn't have 28V DC and is not pin compatible (standard 20-pin vs. 22-pin) with the Gigabit G4 (mine)and later G4 systems. The GigE power supply/motherboard passes 28 Volts DC from the power supply to a connector for the ADC port graphics card.
And even if it could be modded, I wouldn't have a clue as to how to do it.

Offline
Last seen: 2 years 10 months ago
Joined: Dec 20 2003 - 10:38
Here's some help: [url]htt

Here's some help:

http://homepage.mac.com/baakre/.cv/baakre/Public/28v_vreg.pdf-link.pdf

Don't know if you'll be able to still use the ADC port though.

martakz's picture
Offline
Last seen: 7 years 1 month ago
Joined: Dec 20 2003 - 10:38
It would be quite easy to mak

It would be quite easy to make the powersupply output 28V...

Best method: 12V DV to 28V regulated dc convertor board. I once saw one of these in maplin as was very tempted to buy one. They need to be heatsinked, so epoxy the thing to the inside of the ATX's case... They also have auto thermal cut out.

Hard method:

Take the 12V dc line and use an oscillator to create an AC waveform. Feed this through a transformer and boost to around 34V. Then use a the voltage regulators to take that down to 28V and add filter capactiors... Alot of work, but there is plenty of space in the ATX PSU case for modification.

EDIT: Sorry Dead Elvis, I did not see your post! Anyway, the method described on your link is far better than my linear transformer. It looks like it uses a buck boost, switch mode?

Anyway, that will be alot more efficient than a linear boost...so go for that!

Offline
Last seen: 13 years 4 weeks ago
Joined: Dec 28 2004 - 12:46
Thanks for the suggestions

I really appreciate everyone's feedback, but I really am not looking to mod an ATX power supply. I just want a replacement, and am really not comfortable messing around with mods like this. If anyone has an Apple power supply that works specficially for the G4 Gigabit models for a reasonable amount please let me know.

Thanks again for the suggestions, though.

Offline
Last seen: 12 years 4 months ago
Joined: Feb 4 2006 - 12:44
web site for you

Try this one I am on a mission to replace my power supply and this seems to be the best deal.http://mac.techrestore.com/

good luck

Log in or register to post comments