Apple

My MacWorld

Submitted by macpeople1 on October 21, 2004 - 10:19am

A shot of my "MacWorld". Included in the various pictures are a 17" G4 PB 1.0 GHz with 1 GB RAM, a 1.25 GHz 20" iMac with 1 GB RAM, 2 Firewire HD's (Maxtor 160 GB and LaCie 120 GB), 600 MHz 12" G3 iBook, HP ScanJet 4670, Apple LaserWriter 320, various older Macs including G4 Cube, Black Mac Original 128K Mac, Mac Plus, Mac Classic, SE 30, Classic II, Duo 280c, Duo 2300, PB 170, QuickTake 100 & 200, Newton MessagePad 130, iSight, Mini iPod (Aluminum), various Mac posters and other memrobilia such as watches, mug, and a Mac Aquarium made out of a Mac Classic.

Taxonomy: 
Apple
Embedded

Power Button Mod - Case With new Power Button LED

Submitted by tao_ops on October 13, 2004 - 7:23pm

The case with a new LED.

Taxonomy: 
Apple
Other

Power Button Mod - Stock Power Button Board

Submitted by tao_ops on October 13, 2004 - 7:20pm

The power button board...full frontal.

Taxonomy: 
Apple
Other

Power Button Mod - Removing the Power Button Assembly

Submitted by tao_ops on October 13, 2004 - 7:16pm

Removing the power button assembly.

Taxonomy: 
Apple
Other

Power Button Mod - Power Button Assembly Attached to Front Panel

Submitted by tao_ops on October 13, 2004 - 7:14pm

The power button assembly attached to the front panel.

Taxonomy: 
Apple
Other

Power Button Mod - Power Button Assembly

Submitted by tao_ops on October 13, 2004 - 7:11pm

Another view of the Power Button board assembly.

Taxonomy: 
Apple
Other

Power Button Mod - Back of Power Button Board

Submitted by tao_ops on October 13, 2004 - 7:09pm

The back of the Power Button Board. Hey, some people are kinky like that.

Taxonomy: 
Apple
Other

Power Button Mod - Power Button Assembly

Submitted by tao_ops on October 13, 2004 - 7:07pm

This is the Power Button Assembly. Board, cover, ten wire cable.

Taxonomy: 
Apple
Other

Power Button Mod - Finished Product

Submitted by tao_ops on October 13, 2004 - 2:41pm

The finished product.

Taxonomy: 
Apple
Other

Power Button Mod - Where to put the new LED

Submitted by tao_ops on October 13, 2004 - 2:36pm

Insert the long pin of the LED into the left hole and the short pin into the center hole. Solder, test, and you're done.

Taxonomy: 
Apple
Other

Pages

Subscribe to Apple