Apple II

Help for connecting a 7" LCD to A2e

Submitted by JulGiul on January 18, 2026 - 10:34am

Hi everyone!

I just found an unused 7" color LCD, 800x480 with an LVDS 20 pin iterface (and touch screen).

It would be nice to use it on my A2e :-)

I suppose this is almost out of topic,  but every hont is well accepted!

I found 2 small driver cards with AV-composite input on AliExpress,  but then I have to choose the firmware, and here I get stuck,  since I have no knowledge about LCDs.

 

My LCD is an Ampire am-800480-rs-tmqw-ta2h 

3-3.6V , 2W,  20 pin LVDS

The almost correct specs I found are here:

Forums: 
Apple II

Apple IIGS RAM Failure Diagnostics

Submitted by techconspiracy on January 12, 2026 - 10:27pm

I recently acquired an Apple IIGS.  When turning the computer on, the screen fills with the "@" symbol for about half a second (which I believe is normal), then shows the following corrupted display:

Forums: 
Apple II

Introducing BurgerDisk, a daisy-chainable Smartport hard drive

Submitted by colinleroy on January 12, 2026 - 3:40pm

BurgerDisk is a Smartport hard drive for the Apple II. Its main unique feature is that it is daisy-chainable.

As all Smartport SD-based hard drives, it's more adapted to the non-slotted Apple II, like the //c and IIgs.

 

Here are a couple pictures of the finished device:

Forums: 
Apple II

Jim Sather

Submitted by Khaibitgfx on January 5, 2026 - 12:04pm

Forums: 
Apple II

ImageWriter/Super Serial Troubleshooting

Submitted by Anonymoose on January 5, 2026 - 11:12am

Hello,

Seems I've run into a slight issue that I'm also curious about.

 

My ImageWriter DIPs are set to the defaults (11101011 0010) and so are my Super Serial DIPS (terminal mode, 0001011 1001100). However, in AppleWriter 2.1 when printing with the defacto 9600,8,N,1 setting, nothing is printed. It's only when I set DIP 5 on the printer to zero (ignores 8th data bit) that it prints correctly.

 

Not that this is a serious issue, I'm just curious if this is the correct setup and why it's happening. I'd like to learn about parity and whatnot :)

Forums: 
Apple II

New Text Adventure for the Apple II+: Kill Wizard

Submitted by DrkStarr on January 3, 2026 - 12:04pm

Hello. I put together a text adventure using PunyInform and documentation from the Kansasfest 2017. It’s an easy game, with a couple of challenging puzzles, that I built around the interpreter to run on the Apple II+. I had to use the old Infocom one from Lurking Horror to get it to work correctly on an Apple. If anyone is interested, it’s up on itch: Kill Wizard. It should run on a standard II+, though I only tested it using BMOW Floppy Emu.

Forums: 
Apple II

Am I the only one who has thought of this? Updating Apple II models to the latest ProDOS

Submitted by FHR on December 31, 2025 - 5:33pm

I've been thinking an idea on Apple II systems, and I'm hoping I'm not the only one who has asked this beofre. I wonder if there's a way to get the latest ProDOS (2.5 a8 or whichever version) and flash onto the ROM. Upon booting, it shows the exact model, (Apple IIe Platinum, Apple II Plus, etc), and on system level 'boot' into the bitsy bye programs, as well as use other new tools provided by ProDOS.  Could something like this work? 

Forums: 
Apple II

How do I get prodos.sys onto my 32M Apple disk image so it boots?

Submitted by linuxha on December 28, 2025 - 1:08pm

I'm currently workin on the FROB (Apple II/Atari VCS board) and trying to get all my files easily reachable. So far I'm not quite there.

How do I get ProDOS.sys onto my 32M Apple disk image so it boots into ProDOS?

Forums: 
Apple II

Pages

Subscribe to Apple II