Apple II

hi;

well I figured out what was going wrong with adt [apple disk transfer] , in regards to transfering .dsk images from the PC -> my //C , it wasn't the fact that the .dsk image was a 8-sector or 16-sector format , adt was checking the actual disk format , to see if it was 16-sector , so to fix this problem , all I had to do was boot up dos 3.3 system master , typed FP and INIT HELLO , ran adt again and tryed the transfer again and it worked flawlessly! thanks to everyone in the past who gave me good advice on what to check.

take care.

A2forever.

Hi!

I was recently booting up some old 5.25 Floppys the other night , and ofcourse I
got the dreded re-calibration noise and I/O errror. Now when I go to boot up any
Floppy Disk , I get the dreded calibration noise and error . Is it possible the disks that I tried put my 5.25 internal drive out of calibration? If so , is it possible to have the IIC bootup to the 5.25 External drive? If not , I would like to know how to calibrate an apple //drive.

see ya.

A2Forever

Hi,, all I have been getting the best info .. here so I will try again...

I downloaded ADT_2005 .. and finially figured out how to transfer files .. from my Laptop to
my Apple IIe enhanced... but I have tried everything I could find on the net about
doing the same with my Rom1 GS.. and a SSC card.. I have the Apple II ADT side and the DOS pC side ..and they both work great with the IIe .. I have tried the card in slots 1,2 and 7.. config. each slot as your card.. and when I try to get Dir. or recieve a file and the Apple II adt goes into limbo... any Ideas? ...

I am having a problem booting into ProDOS with my latest hardware emulator. When I boot from a ROM drive without the floppy ROM, ProDOS boots correctly. But when the ROM for the floppy is visable, ProDOS seems to go into neverland. Depending on the contents of memory, it can do almost anything. I traced the boot process and it appears that when the ROM is visable, some code is missed and when a RTS is executed, there is some extra data still on the stack and this becomes the program counter. And this is why the RAM contents affect what happens.