Apple II

Eprom burned! Now I have to figure out how to make a machine pin socket to accept the new Eprom.

Submitted by A2forever on May 1, 2011 - 7:59am

Ok now that I have the Eprom burned now I need to have a socket made? Anyone in here know how to make a soldered machine pin socket? I have to figure out which pins to jump via small wires and add two long wires that I can attatch to a Single Pole Single Throw switch. This will be used for what's called Bank Switching. This will enable me to switch between a standard auto start f-8 to a non auto start f-8. It's just trying to figure out the pins and what does what will help in figuring out which ones to jump and cut.

Thanks.

Patrick.
A24ever.

Forums: 
Apple II

Imagewriter ribbons

Submitted by Disk II on May 1, 2011 - 5:12am

The old monochrome ones–Where to find?

Forums: 
Apple II

Wow Did i get a Bargain here or am I over esitmating how much this is worth?

Submitted by redviper-x on April 28, 2011 - 6:12pm

So I just Picked up a 'new old stock boxed unopened' Apple Super Serial Card off of ebay for 50USD which paypal converted to 30.89 GBP free postage from New Jersey! if it's as good and as unopened as the pictures and description suggests and it works. then am I right to be a little too excited over this?

Forums: 
Apple II

Need help burning two binary files to a 2732 Eprom.

Submitted by A2forever on April 27, 2011 - 10:18am

I have a question about burning Eproms. I have a GQ USB programmer for my PC. I want to burn two binary files onto a 2732 Eprom. I was told you have to adjust whats called a
" OFFSET " setting? I tried loading a binary file which worked fine . But when I loaded the second binary file into memory it pretty much erased what I had already loaded before.
Maybe I'm missing a step here and someone in this forum who understands how to do this can better explain how to acomplish this task.

Forums: 
Apple II

The passing of Ryan Suenaga

Submitted by gsmcten on April 25, 2011 - 9:32pm
Forums: 
Apple II

How to delete the annoying crack screen intros

Submitted by macman223 on April 19, 2011 - 10:08pm

You know those Annoying Crack Screens that show up while a program was starting up, Like the attached files below? Every time I boot a program I see these every time.

Forums: 
Apple II

Using an Apple II to display the weather.

Submitted by kormsbee on April 18, 2011 - 8:43am

Over at hackaday.com, someone is using an Apple ][ to show him the weather,

http://hackaday.com/2011/04/18/apple-ii-weather-display-part-1/

Forums: 
Apple II

Is there a program to show the files on a diskette in the correct order the Apple II reads them during disk boot sequence

Submitted by macman223 on April 16, 2011 - 1:19pm

I'm just wondering
is it possible to see the program files on a diskette (ProDOS) in the proper order
of which the disk drive reads them during a program's Boot sequence?

Forums: 
Apple II

Help with a ProDos program not loading the actual program

Submitted by macman223 on April 9, 2011 - 11:43pm

Hi guys,
I know you can help me in solving this problem
It has to do with two educational 8-bit ProDOS programs
downloaded from the Asimov archives, and Apple IIe

Forums: 
Apple II

Apple //c problem

Submitted by Mr.Fix on April 8, 2011 - 11:58am

Hi, im trying to transfer some Prodos to my bare metal apple //c. I have my null modem cable hooked to my apple //c (modem port) and to my Laptop (usb connection, COM3 (which is the lowest com i have, the rest are com4-6), usb to serial converter cable with installed driver (micro innovations)). The problem i have is when i do 'IN#2' on the //c, and press i do get the '?' but cannot type in the 14b it requests me to input. It seems that when i press the first character the '?' turns into a square block cursor but no characters are actually outputted to the screen. This is normal?

Forums: 
Apple II

Pages

Subscribe to Apple II