Apple II

Please Help

Submitted by Smith022 on March 30, 2006 - 1:58pm

I have an Apple 2 plus, with most of its original hardware and software. All seems to work well, but I cannot enter anything with the keyboard. I have tryed replugging the keyboard in, but nothing I try to do works.

Any suggestions?

Thank you in advance,

Smith

Forums: 
Apple II

girl with a apple tattoo :)

Submitted by 6502enhanced on March 30, 2006 - 8:27am

Hi all,

I found this in a german Apple Forum:

A girl that really loves Apple Smile

www.apfeltalk.de/forum/apple-tattoo-t35554.html

Greetings

Forums: 
Apple II

Apple IIc Plus and Fujitsu external 3.5" Floppy drive problems

Submitted by rleith on March 27, 2006 - 8:32pm

I recently acquired an external Fujitsu 3.5" 800k floppy drive. I cannot get it to work with my IIc Plus. According to the system manual....the drive should be recognized as slot 5, drive 2. Instead it sees it as slot 6 drive 1. The l.e.d. comes on, but it wont read any disks. I do a verify and it says the disk is write protected when it's not. I can't format a disk, verify a disk, or catalog a disk from the external floppy. Could the drive be toast?

Thanks in advance.

Forums: 
Apple II

IIc keyswitch problem

Submitted by Jon on March 25, 2006 - 7:41pm

I just dug out my //c to get some stuff setup to let my child play with, and I found that the Control key is loose. I took apart the //c to discover that the top of the keyswitch has come apart and the only thing keeping the key in place is the key underlay that is built-in to the //c. I need to know how to get the cap back on, or somehow get it back together. I don't wanna pry on the keys much until I know how they come off. I can get the bottom (toward the user) side of the key cap to latch back on, but the top side might either be not latching or broken.

Forums: 
Apple II

How to make a DOS Boot disk for my apple IIe

Submitted by FunnymanSE30 on March 25, 2006 - 7:26am

I have an apple iie platinum that I got from a school. It works fine but by the time I found it and asked they had thrown away the old 5.25" DOS disks, and games. Now my question is: How can I make either a ProDos, or Dos 3.3 bootdisk without an existing one. All I have is the .dsk image. I do have a 5.25" FDD in my Wintel PC but im not sure if i would be able to make the disks with that.

Forums: 
Apple II

Looking for original Apple ][ keyboard

Submitted by nama_chari on March 24, 2006 - 10:14pm

Some of you have probably seen my postings on some Apple ][ specific online groups.

I'm looking for an Apple ][ keybord with the raised powerlight. I had a very unhappy accident with my one. I am in the middle of restoring an Apple ][ and I spilt flux remover on the keyboard while it was in transit, and melted many of the keys solid!

For your reference I have posted a picture of the keyboard type I want here:
http://www.applefritter.com/node/17748?res=original

Forums: 
Apple II

Memory For Apple IIc Plus

Submitted by rleith on March 22, 2006 - 6:21pm

Is there a command I can type that will tell me how much ram I have in my Apple IIc plus computer?

Thanks.

Forums: 
Apple II

acoustic coupler - problems - need help

Submitted by 6502enhanced on March 19, 2006 - 6:00am

Hallo,

this is my old acoustic coupler:

Problem as follows:

- ProTerm initializes the modem without problems.
- If I call a number and put the telephone receiver into the coupler nothing happens ???
The read light on the coupler is on and no more rection ...

Do I something wrong or is the coupler broken ????

IMAGE(http://img212.imageshack.us/img212/1205/img45295ho.jpg)

Forums: 
Apple II

Contiki with a modem ?

Submitted by 6502enhanced on March 18, 2006 - 8:43am

Hallo,

I am waiting for my Uthernet-Card and playing around with contiki ...

Is there a possibility to run contiki with a modem ?

Thanks a lot !

Forums: 
Apple II

How do I set the Apple IIc Plus to 80 column text mode?

Submitted by rleith on March 13, 2006 - 11:06pm

I am trying to set the text mode to 80 columns. I do have a system utilities disk 4.0 I want to fit a lot more characters on screen while typing programs in AppleSoft Basic. What is the Peek, or Poke command to do this? Thanks a bunch.

Forums: 
Apple II

Pages

Subscribe to Apple II