I have two Dual 500Mhz logicboards with the cpus and heatsinks. They have been powered up and booted from a Cd, are known to work and are Guarrenteed NO DOA. These are working pulls from G4 gigabit machines.. These do not come with the clock battery. Only the logicboard/cpu and heatsink with the retainer clips. These logicboards have the 22pin power connector on the logicboard and the saw tooth 20pin will not work on this board
$68.50 each shipped from 76086
TIA
FS, Two dual cpu 500MHz
December 12, 2006 - 7:46pm
#1
FS, Two dual cpu 500MHz
so would this work in a G3 PM case with existing power supply and such?
I'm not sure if it will or not. However the G3 psu will not work on the gigabit logicboard as it requires a 22pin connector from the psu or you could do a ATX converison for the dual 500 logicboard.
These have four PCI slots and AGP? Would you consider shipping to Australia? Yes, I know it will be slow, or expensive, or both.
both of the Dual boards w/cpu's have been sold and Shipping to Australia is no problem. I'm not sure when I'll get more of these dual 500s in. However I will PM you when I do.
The duals that I had are the gigabit machine with 3 pci slots and the one agp. The D.A. model has the 4 pci and the agp and the gigabit still has the 100MHz bus while the Digital Audio has a 133MHz bus.