FS, Two dual cpu 500MHz

5 posts / 0 new
Last post
Offline
Last seen: 11 years 3 months ago
Joined: May 29 2005 - 22:35
Posts: 284
FS, Two dual cpu 500MHz

I have two Dual 500Mhz logicboards with the cpus and heatsinks. They have been powered up and booted from a Cd, are known to work and are Guarrenteed NO DOA. These are working pulls from G4 gigabit machines.. These do not come with the clock battery. Only the logicboard/cpu and heatsink with the retainer clips. These logicboards have the 22pin power connector on the logicboard and the saw tooth 20pin will not work on this board
$68.50 each shipped from 76086
TIA

Offline
Last seen: 6 years 6 months ago
Joined: Dec 22 2006 - 15:53
Posts: 7
in a G3?

so would this work in a G3 PM case with existing power supply and such?

Offline
Last seen: 11 years 3 months ago
Joined: May 29 2005 - 22:35
Posts: 284
Dual 500

I'm not sure if it will or not. However the G3 psu will not work on the gigabit logicboard as it requires a 22pin connector from the psu or you could do a ATX converison for the dual 500 logicboard.

DrBunsen's picture
Offline
Last seen: 6 years 3 weeks ago
Joined: Dec 20 2003 - 10:38
Posts: 946
These have four PCI slots and

These have four PCI slots and AGP? Would you consider shipping to Australia? Yes, I know it will be slow, or expensive, or both.

Offline
Last seen: 11 years 3 months ago
Joined: May 29 2005 - 22:35
Posts: 284
Dual 500s

both of the Dual boards w/cpu's have been sold and Shipping to Australia is no problem. I'm not sure when I'll get more of these dual 500s in. However I will PM you when I do.

The duals that I had are the gigabit machine with 3 pci slots and the one agp. The D.A. model has the 4 pci and the agp and the gigabit still has the 100MHz bus while the Digital Audio has a 133MHz bus.

Log in or register to post comments