welcome to my apple II and macintosh blog

7 posts / 0 new
Last post
Offline
Last seen: 8 months 4 weeks ago
Joined: Jul 13 2007 - 07:06
Posts: 182
welcome to my apple II and macintosh blog

http://mypaper.pchome.com.tw/machomeboy/post/1322910351

I released new topic.created new apple II clone case.hope every fans will like it.

gsmcten's picture
Offline
Last seen: 5 years 8 months ago
Joined: Oct 4 2005 - 18:52
Posts: 2629
Re: welcome to my apple II and macintosh blog

adoreapple,

Love the site and all of the pictures, but none of the characters are comming up.
What software are you using to create the web page?

The Apple II in-a-box is great. Smile

Offline
Last seen: 8 months 4 weeks ago
Joined: Jul 13 2007 - 07:06
Posts: 182
Re: welcome to my apple II and macintosh blog

thanks you for you like my website.I apologies for this is chinese blog,I have been considered translate english version.but my english is so poor.so this website is chinese version.maybe you can't know this comment means.never mind.I can explain it.this is my first to create transparent case box for apple II computer.I have been changed this one again.just because it was broken inside.so I bought it twice.it use ps2 keyboard converter and 15 pin pc game I/O converter.all instructions come from apple II english website.so I have this idea to create this one for everyone.in truth.read this expert release article about apple II investigate.I save a lot of money and can do it over and over again.just because we can buy motherboard and assemble a full of computer.it no necessary to buy apple II case computer.that's so great and easy to do.hope everyone will like it.

gsmcten's picture
Offline
Last seen: 5 years 8 months ago
Joined: Oct 4 2005 - 18:52
Posts: 2629
Re: welcome to my apple II and macintosh blog

As I went through all of the pictures, I thought about the fact that I could buy a three drawer plastic storage unit and place the motherboard in the middle drawer and the keyboard in the top drawer so that you could use the ribbon cable to attach the two.
I think it might work. With the small casters they supply with these storage units you would be able to make it semi-portable.

Hmmmm. Sounds like an interesting future project. Smile

Offline
Last seen: 8 months 4 weeks ago
Joined: Jul 13 2007 - 07:06
Posts: 182
Re: welcome to my apple II and macintosh blog

maybe,you want to make this one too. but do you know??create this one is so tired. but if you can successful. it is so funny.

you can look for motherboard on ebay. but it is so few on it.when you bid it and receive this one.I can't promise it can work.that's the problem.so just consider.if you want to investigate.you need to make decision and interest.

gsmcten's picture
Offline
Last seen: 5 years 8 months ago
Joined: Oct 4 2005 - 18:52
Posts: 2629
Re: welcome to my apple II and macintosh blog

Adore,

I have about seven IIe motherboards stashed around the house. Plus keyboards, power supplies and all the goodies. I just have to wait until I am employed again before I go out and buy a storage unit. Smile

Offline
Last seen: 8 months 4 weeks ago
Joined: Jul 13 2007 - 07:06
Posts: 182
Re: welcome to my apple II and macintosh blog

ok, good luck

I can provide some suggestions.

you must use knifes for cutting plastic. and do it carefully.you are better use some protect tool.like wood.....

I feel you can use 16 pin converter for keyboard and joystick.if you don't play any games. it is no necessary. if you use apple II e motherboard.I don't know if you can create converter tool?you use apple II e traditional keyboard. you must extend connector line.I assume you use it. it is the best way for create this one.

because this is traditional chinese version blog. you don't install any traditional chinese fonts. make you confuse.

you use this tools.you are better carefully. because plastic is so weak. it will break easily. if you are successful.you can post blog and website to share this surprises and joy.

Log in or register to post comments