WTB/Looking for NOC BAL-500 Eprom Programmer Manual

7 posts / 0 new
Last post
Offline
Last seen: 6 months 3 weeks ago
Joined: Oct 9 2013 - 19:33
Posts: 372
WTB/Looking for NOC BAL-500 Eprom Programmer Manual

Hey, I have a BAL-500 Eprom Programmer. The software is in firmware (Is it software if it's in firmware? You get the point! Smile
but I have no manual and had no luck finding one online (except a pretty picture of the front cover...yeah, that helps a lot!!)

Any help would be appreciated, payment if needed for copying, scanning, mailing, extortion, whatever!
Thanks,
Zan

gsmcten's picture
Offline
Last seen: 6 years 5 months ago
Joined: Oct 4 2005 - 18:52
Posts: 2629
Re: WTB/Looking for NOC BAL-500 Eprom Programmer Manual

zan,

Got a picture of the burner?

Thanks,

Steven Smile

speedyG's picture
Offline
Last seen: 5 years 6 months ago
Joined: Nov 16 2011 - 07:45
Posts: 2493
Re: WTB/Looking for NOC BAL-500 Eprom Programmer Manual

Hello Steven,

forgotten to check the Apple Documentation Center ?

http://mirrors.apple2.org.za/Apple%20II%20Documentation%20Project/Interface%20Cards/Chip%20Programmers/NOC%20BAL500%20EPROM%20Programmer/Photos/NOC%20BAL500%20EPROM%20Programmer%20-%20Front.jpg

sincerely speedyG

gsmcten's picture
Offline
Last seen: 6 years 5 months ago
Joined: Oct 4 2005 - 18:52
Posts: 2629
Re: WTB/Looking for NOC BAL-500 Eprom Programmer Manual

Zan and Speedy,

Nice looking unit.
I wouldn't mind having one myself.

Steven Smile

Offline
Last seen: 6 months 3 weeks ago
Joined: Oct 9 2013 - 19:33
Posts: 372
Re: WTB/Looking for NOC BAL-500 Eprom Programmer Manual

Steven, the picture Speedy posted (or rather the link to it) is the "Pretty Picture"
I refer to in my original post. Unfortunately I have not had any luck finding any documentation.
I've got that one and an Aparat PROM Blaster (which I have the box and manual for)

Thought it would be nice to have any documentation I could find for the BAL-500, even if it was a pdf file.
Zan

Offline
Last seen: 11 months 3 weeks ago
Joined: Apr 1 2005 - 14:31
Posts: 117
Re: WTB/Looking for NOC BAL-500 Eprom Programmer Manual

I saw this post a few days back. Just didn't get a chance to actually scan the manual until this weekend, and I hope the scans are readable enough (I was only able to use a low-end personal scanner) for you to be able to use your card. My own unit model is RP525 of the same BAL500 series.

https://plus.google.com/photos/100412058998389567448/albums/6124054356722550001?authkey=CP-9053fjrDDOg

I hope it helps. Cheers!

Offline
Last seen: 6 months 3 weeks ago
Joined: Oct 9 2013 - 19:33
Posts: 372
Re: WTB/Looking for NOC BAL-500 Eprom Programmer Manual

pitz, thank you very much!
Zan

Log in or register to post comments