Hey, I have a BAL-500 Eprom Programmer. The software is in firmware (Is it software if it's in firmware? You get the point! 
but I have no manual and had no luck finding one online (except a pretty picture of the front cover...yeah, that helps a lot!!)
Any help would be appreciated, payment if needed for copying, scanning, mailing, extortion, whatever!
Thanks,
Zan
zan,
Got a picture of the burner?
Thanks,
Steven
Hello Steven,
forgotten to check the Apple Documentation Center ?
http://mirrors.apple2.org.za/Apple%20II%20Documentation%20Project/Interface%20Cards/Chip%20Programmers/NOC%20BAL500%20EPROM%20Programmer/Photos/NOC%20BAL500%20EPROM%20Programmer%20-%20Front.jpg
sincerely speedyG
Zan and Speedy,
Nice looking unit.
I wouldn't mind having one myself.
Steven
Steven, the picture Speedy posted (or rather the link to it) is the "Pretty Picture"
I refer to in my original post. Unfortunately I have not had any luck finding any documentation.
I've got that one and an Aparat PROM Blaster (which I have the box and manual for)
Thought it would be nice to have any documentation I could find for the BAL-500, even if it was a pdf file.
Zan
I saw this post a few days back. Just didn't get a chance to actually scan the manual until this weekend, and I hope the scans are readable enough (I was only able to use a low-end personal scanner) for you to be able to use your card. My own unit model is RP525 of the same BAL500 series.
https://plus.google.com/photos/100412058998389567448/albums/6124054356722550001?authkey=CP-9053fjrDDOg
I hope it helps. Cheers!
pitz, thank you very much!
Zan