1 uf capacitors instead of .1 uf

5 posts / 0 new
Last post
T-Friz's picture
Offline
Last seen: 3 years 2 months ago
Joined: Dec 29 2016 - 14:16
Posts: 22
1 uf capacitors instead of .1 uf

I recently got the Apple-1 kit from Unicorn Electronics for my Mimeo. Instead of supplying 17 .1 uf capacitors, they supplied 17 1.0 uf.
I contacted Unicorn, and their response was "The parts list from Mike Willegal that we use lists 1 mf."
I'm pretty sure these will work fine and only impact authenticity which I'm not concerned with, but I just wanted to make sure here first.

Thanks for any help! (Sorry for another dumb question)

Offline
Last seen: 4 years 5 months ago
Joined: Jul 29 2012 - 10:04
Posts: 26
Re: 1 uf capacitors instead of .1 uf

You are correct they should be just fine. I remember reading here about that and they just went ahead with 1 uf. Too small would be worse than too big. Good luck!

Offline
Last seen: 4 years 5 months ago
Joined: Jul 29 2012 - 10:04
Posts: 26
Re: 1 uf capacitors instead of .1 uf

You are correct they should be just fine. I remember reading here about that and they just went ahead with 1 uf. Too small would be worse than too big. Good luck!

Offline
Last seen: 3 weeks 2 days ago
Joined: Oct 9 2011 - 12:54
Posts: 1352
Re: 1 uf capacitors instead of .1 uf

Actually it may be even more reliable with the bigger caps. The Apple-1 design doesn't have enough decoupling caps, and the -5V is really bad.

T-Friz's picture
Offline
Last seen: 3 years 2 months ago
Joined: Dec 29 2016 - 14:16
Posts: 22
Re: 1 uf capacitors instead of .1 uf

Thanks for the help guys, I figured they'd be okay just wanted to be sure before going forward! Thanks!

Log in or register to post comments