I'm try to repair/refurbish a Monitor //c and there's this weird capacitor that I can't find a replacement for.
C515 is a "4 uF 25V NP" cap. I can't find any such animal. Is there another cap I can safely use?
Applefritter Talk
Anonymous
User login
Please support the defense of Ukraine.
Credit card, bank transfer
Bitcoin, Ethereum, Polkadot, USDT
via Unclutter App for Mac
Active forum topics
Recent content
Navigation
Announcements
No Ads.
No Trackers.
No Social Media.
All Content Locally Hosted.
Two Terabytes and Growing.
Built on Free Software.
We have complied with zero government requests for information.
NP simply means the cap is non polarized. Any 4 mfd, 25v or higher non polarized cap should work as a replacement, unless the cap is also HV (high voltage), which would also be marked on the cap.
If you have to buy a new cap, then absolutely get an NP cap. However if you're looking for a quick fix and have a decent supply of caps on hand, you can try two 4uf 25V polarized (e.g. electrolytic) caps in series back to back (i.e. + to +).
It's not the markings that's the problem, it's the apparent availabily of a NP 4 uF capacitor of any voltage, much less 25V. I've checked Mouser and a couple of usual spots and can't find one.
If you can wait 2-3 weeks....See eBay item number:323333285658
The 50v, 4.7UF/475 would be the closest.
20 pieces for US $1.33, free shipping from China to boot!.
Hope that helps. Laurie.
There is a similar capacitor in the early mac analog board that tends to fail.I normally just use a few 1uF monolithic caps wiered in parallel to get the right value.
The 4.7uF monolithic in Lauries link will do the job fine though.